Rubik's Cube
Esc

    How to Solve a 2x2 Rubik's Cube

    The 2x2 is solved in three steps with the same layer-by-layer method as the 3x3: the white layer, the yellow face and the top corners in place. Three algorithms are enough, and every case here has its own 3D cube, set up just as you'll have it in your hands.

    14 min read17 animated cubes

    (R U R' U')6

    On this page
    1. 1. What the 2x2 is
    2. 2. The notation
    3. 3. The method
    4. 4. White layer
    5. 5. Yellow face
    6. 6. Placing the corners
    7. 7. If it goes wrong
    8. 8. Going faster
    9. 9. Which 2x2 to choose
    10. 10. Records and numbers
    11. Frequently asked questions

    In short

    • The 2x2 only has 8 corners. Since there are no centers, the color of each face is decided by the corners you have already placed.
    • Step 1, the white layer: each corner goes above its slot and is inserted by repeating R U R' U'.
    • Step 2, the yellow face: the Sune, R U R' U R U2 R', with a rule for holding the cube before each repetition. It never takes more than three.
    • Step 3, the top corners: with the headlights at the back, R' F R' B2 R F' R' B2 R2. If there are no headlights, the same algorithm twice or the Y perm.
    • If you have already done the 3x3 course, you know all three algorithms: solving a 2x2 is like solving only the corners of a 3x3.

    What the 2x2 is and how it differs from the 3x3

    The 2x2, also called the Pocket Cube, is a cube cut once along each axis. That leaves 8 pieces, and all of them are corners: each one has three stickers of different colors. It has no edges and no centers.

    The lack of centers is what throws people off most if they come from the 3x3. There, the center of each face never moves and tells you what color that face will be. On the 2x2 nothing is fixed: the color of each face comes from the corners that are already correct. If the white, green and red corner is on the bottom with green at the front, the front face will be green because that corner says so, not because there is a center.

    You can check it: if you turn the right layer up (R) and the left layer down (L'), nothing is left scrambled in the middle of a 2x2. The result is the same as turning the whole cube.

    R and L' on a solved 2x2: the cube is still solved, just lying on its side. No face has a fixed color.

    The good news is that there is less to learn. The 2x2 is the same as solving only the corners of a 3x3, and the algorithms in this guide are the ones from the 3x3 beginner's course.

    The notation you need

    Algorithms are written with letters. Each letter is a layer seen from the front and, on its own, means a quarter turn clockwise, as if you were looking straight at that face. The prime (') is the same turn the other way, and the 2 is a half turn. If you want to see each turn slowly, there is the Rubik's Cube notation guide, with an animated cube for every move.

    In this guide you hold the cube with white on the bottom and yellow on top, just like in the 3x3 course. In the 3D cubes, green is at the front, orange on the right, red on the left and blue at the back. For steps 1 and 2 you only need three letters:

    R: the right column goes up and the white from the bottom appears at the front, on the right.

    Rthe right layer

    The right column goes up at the front and away from you over the top. R' brings it down.

    U: the top row slides to the left and the orange from the right comes to the front.

    Uthe top layer

    Seen from the front, the top row moves to the left. U' moves it to the right and U2 gives it a half turn.

    F: the front face turns clockwise and the top row closest to you turns red.

    Fthe front layer

    The face you are looking at turns like the hands of a clock. It appears in the step 3 algorithm, together with B, the back layer.

    When the guide says turn the top layer, move only that layer (U). When it says turn the cube, move the whole cube without changing the white on the bottom. During an algorithm, the front face stays the same until the last turn.

    The layer-by-layer method in three steps

    The method solves the cube floor by floor. First the whole bottom layer, then the top one in two phases: orienting, which means getting everything on top to be yellow, and permuting, which means putting each top corner in its place.

    StepWhat you getAlgorithm
    1. White layerWhite face on the bottom with the sides matchedR U R' U', repeated
    2. Yellow faceAll four top corners with yellow facing upSune: R U R' U R U2 R'
    3. Top cornersEach corner above the ones of its colorR' F R' B2 R F' R' B2 R2

    Step 1: the white layer

    When you finish, the bottom face will be white and, on each side, the two bottom stickers will be the same color. If the white face is complete but one side doesn't match, a corner is in someone else's slot and step 3 won't work.

    How to know where each corner goes

    Since there are no centers, the first white corner you place is in charge. Put it on the bottom with white facing the floor, wherever you like. Its other two colors decide the rest: if it is the white, green and red corner and you leave it with green at the front and red on the left, the front face will be green and the left one red. For the other corners:

    • If it shares a color with the first one, it goes next to it, on the face of that color. The white, green and orange corner goes beside it on the green face, at the front right.
    • If it shares none, it goes diagonally opposite. The white, blue and orange corner goes at the back right.

    How to insert each corner with R U R' U'

    1. Find a corner with white on the top layer and turn the top layer (U) until it sits right above its slot.
    2. Turn the whole cube, always with white on the bottom, so that corner is at the front right, on top.
    3. Repeat R U R' U' until the corner goes down with white facing the floor: once if white faces right, three times if it faces up and five times if it faces you.

    It is the same move as the white corners of the 3x3, with the same counts. In these cubes only the pieces with white are shown in color. In the examples the white, green and orange corner is missing; it goes at the front right.

    The white, green and orange corner on the top right with white facing right: R U R' U' once and the layer is done.
    The same corner with white facing up: three repetitions. After the first and the second it comes out twisted; don't stop.
    With white facing you it takes five repetitions, the longest case.

    If the corner is already on the bottom but wrong

    If it is in its slot but twisted, put it at the front right and repeat the sequence until white is on the bottom: twice if white faces right and four times if it faces you. If it is in a slot that isn't its own, turn the cube so it is at the front right and do one R U R' U': it goes up to the top layer and from there you place it like any other.

    The white, green and orange corner in its slot but with white facing right: two repetitions fix it.

    R U R' U' doesn't touch the other white corners, so you can repeat it without worry. Six repetitions return the cube to how it was: if you reach the sixth, the corner wasn't above its slot.

    Step 2: the yellow face with the Sune

    Now all four top corners have to show yellow toward the ceiling. Whether they are in their place doesn't matter yet; that is step 3. Everything is done with a seven-move algorithm, the Sune: R U R' U R U2 R'. The right face alternates between going up and down, and the top layer always turns to the left: a quarter turn, another quarter and a half turn.

    The Sune twists three top corners and doesn't touch the white layer, but it doesn't always finish on the first try. Before each Sune, count the corners with yellow on top and hold the cube according to this rule, which always looks at the front left corner:

    Corners with yellow on topTurn the top layer until the front left one hasSunes
    OneYellow facing up1 or 2
    NoneYellow facing left2
    TwoYellow facing you3
    FourAlready done0

    It is the same rule as the yellow face of the 3x3; on the 2x2 there is no cross to make first. In these cubes only the white layer and the yellow stickers on top are shown in color.

    One yellow corner: the fish

    With a single yellow corner on top, the pattern looks like a fish. Put it at the front left. If the front right corner has yellow facing you, one Sune finishes the face. If it faces right, it is the reverse fish: the first Sune leaves another fish, U2 brings the yellow corner back to the front left and the second Sune finishes.

    One yellow corner at the front left and the front right one with yellow facing you: one Sune.
    The reverse fish: Sune, U2 to put the yellow corner back at the front left, and another Sune.

    No yellow corners

    Turn the top layer until the front left corner has yellow on the left face. If the left and right faces have two yellows each, do two Sunes in a row. If both yellows are only on the left face, the first Sune leaves a fish out of place: U' puts it in position and the second Sune finishes.

    No yellow corners on top, two yellows on the left and two on the right: two Sunes in a row.
    No yellow corners on top and two yellows on the left face: Sune, U' to place the fish and another Sune.

    Two yellow corners

    Turn the top layer until the front left corner has yellow facing you. With this rule, the two-corner cases take three Sunes, with a turn of the top layer before the second and the third. In the example, the two yellow corners are at the back and the front ones have yellow facing you.

    Two yellow corners at the back and the front yellows facing you: Sune, U', Sune, U2 and Sune.

    The other two cases with two corners (diagonal, or side by side with the other yellows facing different ways) are solved the same way: yellow facing you at the front left, Sune and count again.

    Other tutorials do this step with the cube upside down, twisting each corner with repeated R U R' U'. It works, but it scrambles everything until the last corner. With the Sune the white layer always stays visibly intact.

    Step 3: placing the top corners

    The top face is already yellow, but the corners may be in the wrong places. A top corner is in its place when its two side colors match those of the white layer underneath it. There are no centers to compare with here: the reference is the bottom layer.

    To know how to hold the cube, look for the headlights: on one side, the two top corners with the same color on that face. Turn the top layer slowly and check all four sides. There are only three possibilities:

    • Headlights on all four sides. The corners are already correct relative to each other. Turn the top layer until they match the bottom one and the cube is solved.
    • Headlights on only one side. Two neighboring corners are swapped. You need one algorithm.
    • No side with headlights. Two corners are swapped diagonally. You need the algorithm twice, or a specific one.

    With headlights on one side

    Bring the headlights to the back face by turning the top layer and do R' F R' B2 R F' R' B2 R2. All four corners end up correct relative to each other; at the end, turn U until they match the bottom layer. It is the same algorithm as the yellow corners of the 3x3. It is easier to read in three chunks: R' F R' B2, R F' R' B2 and R2.

    Headlights on the back face: the algorithm places the corners and a final U lines them up with the white layer.

    If the headlights are on the left, one U takes them to the back, because the top layer turns to the left and whatever was on the left moves to the back. Then comes the algorithm and, in this example, a final U'.

    Headlights on the left face: U puts them at the back, the algorithm places the corners and U' lines them up.

    No headlights: the diagonal

    If no side has headlights, do the algorithm once with the cube however it is. When you finish, headlights appear, and always on the left: U takes them to the back and the algorithm, done a second time, places the corners. You may need one U turn at the end to line them up.

    No headlights: the algorithm creates headlights on the left, U takes them to the back and the algorithm again solves the cube.

    The diagonal can also be solved in one go with the Y perm: F R U' R' U' R U R' F' R U R' U' R' F R F'. It works from any position of the top layer, and afterward at most one U turn may be missing.

    The top corners swapped diagonally, with no headlights: the Y perm places them in one go.

    What to do if it goes wrong and common mistakes

    • White face complete but the sides don't match. This is the most common 2x2 mistake: a corner is in someone else's slot. Take it out with R U R' U' from the front right and place it by looking at its neighbors.
    • Stopping halfway through R U R' U'. If you stop after R U R' because the corner looks right, the top layer is left turned. Always do all four turns.
    • Turning the whole cube by accident. It happens more on the 2x2 than on the 3x3, because there are no centers to warn you. If the front face changes in the middle of an algorithm, it fails. Resting the cube on the table between steps helps.
    • Not counting again after each Sune. The pattern changes from one Sune to the next; if you don't reposition the cube, you go around in circles.
    • Seeing headlights on two or three sides. With the yellow face done, that can't happen. Check the colors: red and orange are easy to mix up in poor light.
    • Breaking the white layer. Go back to step 1; taking out one or two corners and inserting them again is usually enough.

    If everything is solved except a single twisted corner, the cube was put together wrong, for example after a piece popped out. Turning layers can never reach that state: you have to carefully twist that corner by hand, or take it out and put it back correctly.

    Faster: the Ortega method and CLL

    Once the layer-by-layer method comes without looking, the usual next step is the Ortega method, also called Varasano. It has three steps: a face of one color, without worrying about the sides; the opposite face with one of seven algorithms; and finally both layers at once with one of five algorithms. That makes twelve in total, and the Sune is one of them.

    Next comes CLL: you build a complete layer, as in step 1, and solve the rest with a single algorithm out of 42. Beyond that is the EG method, used by the fastest solvers in the world, which starts from a face without matched sides and adds up to 128 algorithms, the 42 from CLL included. You don't need any of them to get started.

    Which 2x2 to choose

    Any 2x2 with the standard color scheme is fine for learning: white opposite yellow, blue opposite green and red opposite orange. It is the one used on the cubes in this guide, so the pictures will match yours.

    • Magnetic or not. Magnetic cubes have small magnets in the pieces that help each layer stop lined up, so they catch less and you don't overshoot a turn. Non-magnetic ones are usually cheaper and lighter, and they are fine for learning too.
    • Size. They range from keychain size to ones that fill your hand. For learning, choose one you can hold firmly in one hand while you turn with the other; very small ones slip between your fingers.
    • Speed cube or toy cube. A speed cube turns more smoothly. If yours locks up, finish each turn before starting the next: the lockup almost always comes from a layer that didn't finish turning.

    2x2 records and numbers

    FactValue
    Pieces8 corners, no edges or centers
    Possible positions3,674,160
    Maximum number of moves to solve any position11, counting each half turn as one move
    The same maximum counting only quarter turns14
    Official competitionYes, it is one of the WCA events

    The 3,674,160 positions come from this: the 8 corners can be arranged in 8! ways and each one can be twisted 3 ways, although the twist of the last one is fixed by the others (3⁷). Since turning the whole cube doesn't change the position and there are 24 ways to hold it, that gives 8! × 3⁷ / 24. The maximum of 11 moves is God's number for the 2x2: no scramble needs more.

    In October 2025, Ziyu Ye of China did a 0.39 s single at the China Hefei Open, the first time anyone went under four tenths of a second at an official competition. The best official average, of five attempts without counting the best or the worst, is also already under one second. The WCA publishes the up-to-date list of records on its website.

    The first patented 2x2 isn't Rubik's but American Larry D. Nichols': his cube of pieces held together with magnets was patented in the United States in 1972. Rubik's was patented there in 1983, and in 1986 an appeals court confirmed that it infringed Nichols' patent.

    Frequently asked questions

    How many algorithms do you need to solve the 2x2?

    With this method, three: R U R' U' for the white layer, the Sune (R U R' U R U2 R') for the yellow face and R' F R' B2 R F' R' B2 R2 to place the top corners. The Y perm is optional and only serves to solve the diagonal in one go.

    How do I know what color each face is if the 2x2 has no centers?

    The corners you have already placed tell you. The first white corner decides the colors of the faces it touches, and each new corner goes next to the one it shares a color with. On the top layer, the reference is the white layer on the bottom.

    Can you solve the 2x2 in 4 moves?

    Only if the scramble is very simple. Some positions need at least 11 moves, so no 4-move trick works for every scramble. When a tutorial talks about 4 steps, it means the phases of the method, not moves.

    How many combinations does the 2x2 Rubik's Cube have?

    3,674,160 different positions, counting as one those that only differ in how you hold the cube. That is far fewer than the 3x3, but more than enough for random turning to be useless.

    If I can solve the 3x3, does that help with the 2x2?

    Yes. The 2x2 is the same as the corners of a 3x3, and R U R' U', the Sune and the headlights algorithm work the same way. The only new thing is that there are no centers: the bottom layer is built by matching the corners to each other, and the top ones are lined up with the white layer.

    Is the 2x2 a good cube for beginners or for kids?

    It is a good way to learn the layer-by-layer method: three steps and three algorithms. The hardest step at first is the first one, matching the sides of the white layer, so it is worth practicing until it comes without hesitation.

    You can already practise in the simulator

    Turn the layers with your finger, scramble the cube and try any algorithm step by step.

    Open the simulator

    Keep learning

    We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.

    See cubes in the shop →