Roux method: blocks, corners and the last six edges
Roux solves the cube with two 1x2x3 blocks, one on each side, the four top corners with one algorithm and the six remaining edges with M and U moves. It uses fewer moves than CFOP, and almost everything is solved by understanding the pieces, not by memorizing. This guide explains each phase with 3D cubes and a starter version with only 9 algorithms.
M' U M' U M' U M' U2 M' U M' U M' U M'
On this page
In short
- Roux has four phases: first block, second block, CMLL (the top corners) and LSE (the last six edges).
- It was introduced by the Frenchman Gilles Roux in 2003. Many speedcubers use it, although most of the fastest ones stick with CFOP.
- Both blocks are built intuitively. The second one is built with only R, r, U and M so the first one stays intact.
- Full CMLL is 42 algorithms. To start, doing it in two steps is enough: 7 algorithms to orient the corners and 2 to place them.
- The last six edges are solved with only M and U, in three steps: orient them, place the side ones and finish the four in the middle layer.
- A good Roux solver uses about 48 moves per solve; with CFOP, between 55 and 60 is normal.
What the Roux method is and where it comes from
Roux is a block-building method. Instead of starting with a cross, as in CFOP, you build a 1x2x3 block on the left face and an identical one on the right. Between them, the top layer and the middle layer, M, stay free, and everything that's left is solved by turning those two layers.
It was introduced by Gilles Roux, a French speedcuber, in 2003. The idea was to combine block building with a finish done only with M and U moves.
| Phase | What you do | Algorithms |
|---|---|---|
| First block | A 1x2x3 block on the left face | None, it's intuitive |
| Second block | Another 1x2x3 block on the right face | None, it's intuitive |
| CMLL | The four top corners, oriented and placed | 42, or 9 if done in two steps |
| LSE | The six remaining edges and the M-layer centers | None fixed; it's done with M and U |
Both names are English acronyms. CMLL stands for corners of the last layer, “without taking the M layer into account”: the algorithm can mess up the middle edges, because they get fixed later. LSE stands for last six edges.
All the cubes in this guide are held with white on top and green at the front. The blocks are built on yellow, which is on the bottom; orange is on the left and red on the right. If you don't know the M and r moves, go over them in the notation guide before going on.
First block: a 1x2x3 on the left
The first block takes up the bottom two rows of the left face. It is five pieces around the orange center: the bottom left edge, the two bottom left corners and the two middle-layer edges on that side. Seen from the left, it is a rectangle two rows high and three columns wide.
There are no algorithms for this phase. At first it is like doing two F2L slots: first you place the bottom edge and then you form two corner-edge pairs, one for the front and one for the back. With practice you will build it in chunks, using whatever is already joined in the scramble, and you will save moves.
You have more freedom than in CFOP's F2L: since nothing is solved yet, you can turn any face and use the whole middle layer and the right side to move pieces. In the example, the yellow-orange edge is at the top back. U' L2 brings it down to its place, U' L' U L inserts the front pair and U L U' L' the back one.
- Always pick the same block at first. With yellow on the bottom and orange on the left you will recognize the pieces faster. Later you can choose whichever one comes out shorter in each scramble.
- Plan it during inspection. Like the cross in CFOP, the first block is the part you can best think through before you start turning.
- Watch the center. The block is built around the orange center. The M-layer centers can be out of place; they get fixed at the end.
Second block: the same 1x2x3 on the right
The second block is the same as the first, now around the red center and with the same bottom face, yellow. The difference is that now there is something to protect. An L, F, B or D move would move pieces of the first block, so in this phase you only use R, r, U and M. None of those moves touches the left face.
The order to start with is the same: the bottom right edge, then the back pair and finally the front one. The pairs go in with three-move sequences like R U R', which take a piece out of the block and return it to its place. The M layer is free, so you can turn it to get a piece out from the front or the bottom without breaking anything.
In the example, U R2 brings down the yellow-red edge, U' R' U R inserts the back pair and U R U' R' the front one. The first block doesn't move at any point.
With both blocks finished you have ten loose pieces left: the four top corners and six edges (the four on top plus the bottom front and bottom back ones). The corners are done with an algorithm and the edges, with M and U.
CMLL: the four top corners
CMLL orients and places the four top corners without breaking the blocks. Since the top edges and the M-layer edges are still loose, the algorithms are allowed to mess them up, and that is why they are shorter than CFOP's for the same job. Done in a single step, it is 42 algorithms.
To start, you do it in two steps: first you turn the white of all four corners to face up and then you put them in place. That is 9 algorithms, 7 to orient and 2 to permute. If you come from the intermediate method, you already know the idea: any algorithm that keeps the first two layers intact also keeps both blocks intact, so your seven corner orientations work as they are.
Step 1: orient the corners
Turn U until the case matches the description in the table. Several cases come from the same move: F, R U R' U' once or more, and F'.
| Corners with white on top | Where the other whites face | Case and algorithm |
|---|---|---|
| Two, on the right | Both facing left | U: F R U R' U' F' |
| Two, on the right | One facing you and one facing the back | T: R U R' U' R' F R F' |
| Two, diagonal: back left and front right | The front left one facing you and the back right one facing right | L: F R' F' R U R U' R' |
| None | A pair on the left face; of the other two, one faces you and one faces the back | Pi: F R U R' U' R U R' U' F' |
| None | Two facing you and two facing the back | H: F R U R' U' R U R' U' R U R' U' F' |
| One, front left | The front right one facing you | Sune: R U R' U R U2 R' |
| One, back right | The front left one facing you | Antisune: R U2 R' U' R U' R' |
U: F R U R' U' F'
Two corners with white on top on the right, and the whites of the other two facing left. It is the same algorithm that turns the line into the cross in the beginner's course.
Pi: F R U R' U' R U R' U' F'
No corners with white on top, two whites on the left face and the other two apart, one facing you and one facing the back. It is the previous move with R U R' U' twice.
H: F R U R' U' R U R' U' R U R' U' F'
No corners with white on top, two whites facing you and two facing the back. The same move with R U R' U' three times. If the pairs of whites are on the sides, turn U once before you start.
Step 2: place the corners
With white on top on all four corners, look at the sides of the top layer. If two corners on one side have the same color, they are headlights. With headlights on only one side, two adjacent corners need swapping; with no headlights, two diagonal ones. With headlights on all four sides they are already done, and you only need to turn U so they match the blocks.
Headlights: J perm
Put the headlights on the left and do R U R' F' R U R' U' R' F R2 U' R'. It swaps the two corners on the right. The T perm from the intermediate method does the same with one more move, so if you already know it you can use it.
No headlights: Y perm
With no headlights, it doesn't matter how you hold the cube. F R U' R' U' R U R' F' R U R' U' R' F R F' swaps the front right corner with the back left one. It is the same Y perm as in the intermediate method.
LSE: the last six edges with M and U
With the blocks and the corners done, six edges are left: the four on top and the bottom front and bottom back ones, plus the M-layer centers. Everything is solved with two moves, M and U, without rotating the cube. It is split into three steps, which English-language guides call 4a, 4b and 4c.
- Orienting the edges (EO): getting all of them with white or yellow facing up or down.
- UL and UR: placing the white-orange and white-red edges in their spots at the top left and top right.
- The last four: finishing the M-layer edges and their centers.
Step 4a: orient the edges
An edge is good if its white or yellow sticker faces up or down, and bad if it faces a side. Look with the top and bottom centers on white and yellow, in either order; if they are on green and blue, do an M first. Bad edges always come in even numbers: zero, two, four or six. That is why you work out the bottom back one, which you can't see, by counting the other five.
The case to recognize is the arrow: three bad edges on top and one bad edge on the bottom. Set it up with the good top edge at the back and the bad bottom edge at the front, and do M' U M. All six end up good.
The other cases are turned into the arrow first. With two bad edges on top, one at the back and one on the left, M' U M leaves four bad edges, U2 sets them up as an arrow and another M' U M finishes.
Step 4b: the UL and UR edges
Find the white-orange and white-red edges. The simplest way is to bring them to the bottom, one at the front and one at the back, and bring both up at once with M2.
In the example, the white-red edge is at the bottom front and the white-orange one at the bottom back. U' sets up the top layer, M2 brings both edges up and U takes them to the left and right. The top and bottom centers start out swapped on the initial cube, and the M2 puts them back in place. Neither M2 nor U changes the orientation, so what you did in the previous step stays.
Step 4c: the last four edges
What's left are the top front and top back edges, the bottom front and bottom back ones, and the M-layer centers. Now the top layer is only turned with U2: it swaps UL and UR, but the algorithms in this step include two U2 moves and bring them back. If the edges are right relative to each other but the M layer is turned, an M, M' or M2 straightens it.
If three of the four edges are swapped in a cycle, M' U2 M U2 places them. In the example, the white-green edge is at the top back, the white-blue one at the bottom front and the yellow-green one at the top front.
If the two top edges are swapped with each other and the two bottom ones too, M2 U2 M2 U2 places them all.
The cube at the top of the page is a trick from this phase: M' U M' U M' U M' U2 M' U M' U M' U M' flips the top front and top back edges without moving anything else, using only M and U.
Roux vs. CFOP: an honest comparison
Both methods can take you below ten seconds, and neither one is better for everyone. What changes is where the effort goes.
| Roux | CFOP | |
|---|---|---|
| Moves per solve | About 48 for advanced solvers | Between 55 and 60 |
| Algorithms for the full method | 42 CMLL | 57 OLL and 21 PLL |
| Starter version | 9 CMLL algorithms | 16 OLL and PLL, in two steps |
| Intuitive parts | Blocks and last six edges | Cross and F2L |
| Middle layer (M) | Turned in almost every phase | Only in some algorithms |
Pros of Roux
- Fewer moves. The difference is around ten moves per solve, mostly because the block and the M layer give you the freedom to place pieces without undoing what you've done.
- Less memorization. With 42 algorithms you have the full method; full CFOP asks for almost twice as many.
- No rotations. Since everything is done with R, U, r and M, you hardly ever need to rotate the whole cube, and you don't lose sight of the pieces.
Cons
- M moves. They are done by pushing the middle layer with one finger, and they are harder to do fast than an R or a U. An M2 that stops halfway is a typical mistake.
- Some pieces are hidden. The bottom back edge stays out of sight for almost the whole solve.
- Less material. Most of the fastest speedcubers use CFOP, and there are more tutorials, alternative algorithms and fingertrick studies for it.
Who uses it
Kian Mansour broke the one-handed average world record solving with Roux, and Sean Patrick Villanueva has also set records with it.
Who Roux is for and how to learn it
Roux suits you if you like understanding what you do more than repeating sequences, if you find it hard to memorize long lists of algorithms or if solving in fewer moves appeals to you. If you already solve with CFOP and you're happy with it, switching won't make you faster on its own: what you gain in moves, you have to win back by learning to build blocks.
Before you start, you should be able to solve the cube with the beginner's course and read M and r notation without trouble. One possible order:
- The first block, first placing the edge and the two pairs, then in chunks.
- The second block with only R, r, U and M, without breaking the first.
- CMLL in two steps, with the 9 algorithms in this guide.
- The last six edges: the arrow, UL and UR with M2, and the two cases of the last four.
- Once everything flows, the 42 algorithms of full CMLL, starting with the cases that cost you the most time.
Frequently asked questions
Is Roux or CFOP better?
Neither is better at everything. Roux uses fewer moves and needs fewer algorithms; CFOP uses moves that are faster to do and has much more learning material. Both work for competing at the highest level.
How many algorithms does the Roux method have?
Only CMLL uses algorithms: 42 in the full version, or 9 if it's done in two steps, 7 to orient the corners and 2 to place them. The blocks and the last six edges are solved intuitively.
Is what I learned in the intermediate method useful here?
Yes. The seven corner orientations, the T perm and the Y perm keep the first two layers intact, so they also keep the two Roux blocks intact. You can use them for CMLL in two steps.
You can already practise in the simulator
Turn the layers with your finger, scramble the cube and try any algorithm step by step.
Keep learning
- Where do I start? Tell us what your cube looks like and we'll take you to the right lesson.
- Notation: what each letter means R, U, F, the prime and the 2, shown turning in 3D.
- Beginner's course Eight short lessons to solve the cube for the first time.
- Intermediate method (2-look OLL and PLL) The bridge between the beginner's method and CFOP.
- CFOP method Cross, F2L, OLL and PLL: the method used by almost every speedcuber.
- Solving blindfolded The 3x3 without looking, with the Old Pochmann method.
- Solving one-handed How to hold the cube and which algorithms change.
- Fewest moves (FMC) Solving the 3x3 in as few moves as possible.
- Solving the 2x2 The pocket cube, in three steps.
- Solving the Pyraminx The pyramid, with its tips and centres in 3D.
- Solving the 4x4 The Revenge cube, by reduction.
- Solving the 5x5 The Professor's Cube, with the same method as the 4x4.
- Solving the Skewb The cube that turns around its corners, with two algorithms.
- Solving the Megaminx The 12-sided dodecahedron, layer by layer.
We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.
See cubes in the shop →