CFOP method: a complete guide with 3D cubes
CFOP solves the cube in four phases: a cross, the first two layers in pairs, orienting the last layer and permuting it. This guide explains each phase with 3D cubes, the order in which it makes sense to learn them and the habits that help most to lower your times.
R U R' U' R' F R2 U' R' U' R U R' F'
On this page
In short
- CFOP stands for its phases: Cross, F2L (first two layers), OLL (orientation of the last layer) and PLL (permutation of the last layer).
- Jessica Fridrich, a Czech researcher, made it known on the internet in 1997. Several of its ideas already existed before, which is why the name CFOP is used more today than Fridrich method.
- The cross is done on the bottom face and planned in full during inspection. It never needs more than 8 moves.
- In F2L, each white corner is paired with its second-layer edge and the two go in together. It is first learned intuitively.
- The full method has 57 OLL cases and 21 PLL cases. The usual approach is to start with the two-look version, 16 algorithms, and complete it later.
- Look-ahead means looking for the next piece while you solve the current one, so you can link the phases without pauses.
What CFOP is and where it comes from
CFOP is a layer-by-layer method designed to use few moves and recognize each case quickly. It starts like the beginner's method, with a white cross, but instead of placing the corners first and then the second layer, it joins each corner with its edge and places both at once. The last layer is solved in two steps, each with its own algorithm for every case.
| Phase | What you do | Cases |
|---|---|---|
| Cross | White cross on the bottom face | Intuitive, 8 moves at most |
| F2L | Four corner and edge pairs, one per slot | 41 per pair |
| OLL | The whole top face yellow | 57 |
| PLL | Each top piece in its place | 21 |
Jessica Fridrich and the origin of the method
CFOP is also called the Fridrich method, after Jessica Fridrich. She discovered the cube in 1981, in what was then Czechoslovakia, and in 1982 she won the Czechoslovak championship with a 23.55-second solve. That same year she placed tenth at the first world championship, in Budapest, with 29.11 seconds.
With a group of friends she developed a collection of algorithms to orient and permute the last layer. Years later she moved to the United States, where she is a professor of electrical and computer engineering at Binghamton University. After describing it on a hobbyist mailing list, in 1997 she published her complete system on her website, several years before a world championship was held again in 2003.
Fridrich didn't invent every part of the method. The idea of pairing a corner and an edge was already circulating in hobbyist publications in 1981, and that same year in the Netherlands Hans Dockhorn and Anneke Treep published a system of orienting and then permuting the last layer, developed on their own. That is why many cubers prefer the name CFOP, which describes the phases instead of crediting them to a single person.
Cross: the cross on the bottom, planned during inspection
The CFOP cross is the same as in the beginner's method, with two differences: it is done with white on the bottom and without the daisy. If you do it on top, you have to flip the cube before F2L and you lose sight of the pieces you are going to need. On the bottom, the cross is already where it belongs and the F2L pairs are visible on the top layer.
The white cross can always be solved in 8 moves or fewer. If you count every possible position of the four white edges, four out of five can be solved in 6 moves or fewer, and the average is a little under 6. If your cross usually goes over 10 moves, there is room to plan it better.
Placing the edges relative to each other
Each edge doesn't need to be next to its center as soon as you place it. What matters is that they are in the right order relative to each other: green, orange, blue and red, going around the white face. At the end, a single D turn lines them all up with their centers. In the example, F2 and R' bring the green edge down next to the orange and blue ones, which were already in order; D' lines up those three with their centers and L2 brings down the red one. Four moves.
Inspection
In WCA competitions you have less than 15 seconds to look at the cube before starting, without turning any layer. If you start after 15 seconds you get a 2-second penalty, and after 17 the attempt doesn't count. In that time you plan the whole cross, not just the first edge.
- Find all four white edges and notice which color goes with each one.
- Decide the order: start with the ones that go in with one move or with two that are already correct relative to each other.
- Go over the sequence with your eyes, piece by piece, until you can do it without stopping.
- If you have time left, look for where the first F2L pair is. Advanced cubers plan the cross together with that first pair; a cross with one F2L slot already solved is called an X-cross.
To practice, scramble, inspect, close your eyes and do the cross from memory. When you open them you'll know whether your plan was right.
F2L: the first two layers in pairs
With the cross done, there are four empty slots in the bottom corners, each with its second-layer column. In F2L each slot is filled with a pair: the white corner and the second-layer edge that share its other two colors. For example, the white-green-orange corner and the green-orange edge go together in the front right slot.
There are 41 different cases for a pair, depending on where the corner and the edge are and which way their colors face. They can be learned as algorithms, but the reference guides recommend starting with intuitive F2L: understanding how to join the two pieces on the top layer without touching the cross and how to insert the finished pair. With that, you can solve any case even if you have never seen it before.
The idea: bring up, pair and insert
- If either piece is on the bottom, take it out to the top layer with a move that doesn't break the cross for good, such as
R U R'. - Join the corner and the edge on top so that their colors match on the two faces they share.
- Bring the pair next to its slot and insert it with three or four moves.
The trick in almost every case is that you can raise the right face for a moment, move the top layer and lower it again. While R is up, the slot is on top and you can bring pieces to it or take them away; when you lower it, the cross goes back to its place.
The four basic insertion cases
In the following cubes only the pieces without yellow are shown, and the slot being filled is the front right one, the green-orange pair's. The corner is always on the top right, above the slot.
Corner with white on the right and edge at the back: R U R'
The edge is at the back of the top layer, with green facing up. R hides the corner at the back, U joins it with the edge above the slot and R' brings both down.
Corner with white facing you and edge on the left: F' U' F
It is the same case seen in a mirror: the edge is on the left, with orange facing up, and it is done with the front face.
Pair formed on the right: U R U' R'
The corner, with white facing you, and the edge are already together on the right face, with the colors matching on top and on the right. U moves the pair out of the way, R raises the slot, U' brings the pair back above it and R' takes it down.
Pair formed at the front: U' F' U F
The mirror of the previous one: the pair is on the front face and the corner's white faces right.
Examples: turning a case into a basic one
Almost all the other cases are solved with a few moves that leave the pieces in one of the four basic cases. In each example, notice where the pair forms.
Corner with white facing you and edge at the back. U' R U R' joins the two pieces, U2 leaves the pair at the front left and R U' R' inserts it.
Corner with white on top. This is the most awkward case, because with white on top you can't join them directly. U R U2 R' turns the corner and leaves the pair formed on the right, and U R U' R' inserts it.
Corner in its slot but twisted. First you have to take it out. R U' R' brings it up and, in this case, already leaves it next to its edge; U R U' R' inserts the pair.
F2L tips
- Avoid rotating the cube. Each
ycosts time and makes you lose sight of the pieces. For the front left slot, use your left hand, withL' U' LorL U L', instead of rotating the cube. - Make use of empty slots. While a slot is free, you can use it to move pieces without breaking anything solved.
- Start with the easiest pair. If a pair is already formed or goes in with three moves, do it first.
- Once intuitive F2L comes without thinking, look up the algorithms for the cases you find hard and compare them with your solution.
OLL: orienting the last layer
After F2L, the yellow on the top face can be arranged in 58 different ways: 57 cases and the face already done. Full OLL has an algorithm for each one and makes the whole face yellow in one go, no matter where each piece ends up.
Most people don't start with all 57. The previous step is 2-look OLL: first the yellow cross (3 cases) and then the corners (7 cases). With those 10 algorithms you can already solve any OLL, though looking twice. Nine of them (the 7 corner ones plus the line and the L) are also full OLL algorithms, so nothing is lost; only the dot one, which is two combined, isn't.
The cases are grouped by the shape the yellow draws on top: with the cross done, dot, line, L, T, P, W, C, squares, lightning bolts and others. Learning by groups helps, because cases with the same shape usually have similar or mirrored algorithms.
A full OLL case you already know
F R U R' U' F' is the line algorithm in 2-look OLL, but it is also a full OLL for one specific case: the horizontal line with the two right corners already yellow on top, a T-shaped pattern. From there, a single algorithm finishes the face.
The library of all 57 OLL cases shows them all in 3D, grouped by shape and with their probability.
PLL: permuting the last layer
With the yellow face done, the top pieces can be left in 21 different combinations that can't be fixed by turning U. Full PLL has an algorithm for each one and finishes the cube, sometimes with a last U turn.
If you are coming from 2-look PLL, you already know 6: T perm, Y perm, Ua, Ub, H and Z. That leaves 15. Each PLL has a letter name, and many come in pairs that are mirrors of each other, such as Aa and Ab, Ja and Jb or Ra and Rb.
How to recognize a PLL
Look at two adjacent sides of the top layer, for example the front and the right. Look for headlights (the two corners on a side with the same color) and blocks (a corner and the edge next to it with the same color). With practice, many cases can be told apart by looking at only those two sides, without rotating the cube.
T perm: R U R' U' R' F R2 U' R' U' R U R' F'
Headlights on the left, with an edge of a different color between them, and three different colors on the right face: the two right corners and the left and right edges are swapped. It is the same T perm as in the 2-look method, now seen with every sticker.
Aa perm: x R' U R' D2 R U' R' D2 R2 x'
The edges are already correct and three corners cycle among themselves. Put the headlights at the back. It starts with x, which turns the whole cube like R and brings the face that was at the front to the top, and it ends with x' to put it back as it was. In between, only nine moves.
The library of all 21 PLL cases collects them all in 3D, with how to recognize them from the sides.
Learning path: in what order to learn CFOP
Full CFOP adds up to 119 algorithms: 41 for F2L, 57 for OLL and 21 for PLL. You don't need to learn them to start using it. A sensible order is this one:
- Cross on the bottom, even if at first it takes you longer than with the daisy.
- Last layer in 4 looks: 2-look OLL and PLL, 16 algorithms. If you already know them from the intermediate method, skip to the next point.
- Intuitive F2L, with the four basic cases and the idea of pairing. There are four pairs per solve, so it is the phase with the most moves.
- Full PLL: 15 new algorithms. Each one saves a whole step in the last layer.
- Full OLL: 48 new algorithms. It is learned by shape groups, a little at a time.
- F2L algorithms for the cases that are slow for you with the intuitive method, instead of memorizing all 41 at once (in the F2L library).
Doing PLL before OLL makes sense by the numbers: it is 15 algorithms versus 48, and with full PLL the last layer already drops from four looks to three. So you don't forget what you've learned, add a few algorithms at a time and review the earlier ones before adding more.
Look-ahead: solving without pauses
If you record a solve and watch it afterward, you'll see pauses: moments when you stop to look for the next piece. Look-ahead means looking for the next F2L pair while your hands solve the current one, so you can link one to the next without stopping.
- Turn more slowly. Do slow, steady solves without a single pause. If you need to stop, you are going too fast for your look-ahead.
- Don't watch the pair you are inserting. Your hands can do R U R' on their own; your eyes need to be on the top layer looking for the next pieces.
- Use few moves. The fewer moves you use on a pair, the less the other pieces move around and the easier they are to track.
- Practice with the cube in view. Hold the cube so you can see the top layer and two sides; avoiding rotations helps you keep your reference.
Common mistakes when learning CFOP
- Memorizing F2L algorithms before understanding it. If you don't know why a case works, any variation will leave you stuck. Intuitive first.
- Still doing the cross on top. Flipping the cube and losing your reference cost more time than it seems.
- Planning only the first edge of the cross. Use inspection to have the whole cross in your head.
- Rotating the cube for every pair. Many rotations can be avoided with a U turn or by using the left slot.
- Learning full OLL too early. If your F2L is slow, saving one look in the last layer makes little difference to your final time.
- Getting obsessed with turning fast. A well-tuned cube and fast fingers help, but without look-ahead you'll keep stopping between pairs.
Track your times with averages of five, as in WCA competitions: the best and worst are dropped and the other three are averaged. A single good solve says little; the average reflects your level better.
Frequently asked questions
What does CFOP stand for?
It is the initials of its four phases: Cross, F2L (first two layers), OLL (orientation of the last layer) and PLL (permutation of the last layer).
Who invented the CFOP method?
It doesn't have a single inventor. Jessica Fridrich developed her last-layer algorithms in the early 1980s and published the method on the internet in 1997, which is why it is also called the Fridrich method. The idea of pairing a corner and an edge and that of orienting and then permuting the last layer also appeared separately in publications by other hobbyists of the time.
How many algorithms does CFOP have?
In full, 119: 41 for F2L, 57 for OLL and 21 for PLL. To start using it, 16 are enough, those of 2-look OLL and PLL, and F2L can be done intuitively without memorizing any.
What are the chances of skipping OLL or PLL?
If you do nothing to force it, the yellow face comes out already done after F2L in 1 out of 216 solves, and the last layer is already in place after OLL, except perhaps for a U turn, in 1 out of 72.
How much inspection time is there in competition?
Less than 15 seconds. If you start between 15 and 17 seconds, you get a 2-second penalty, and from 17 onward the attempt doesn't count.
What is an X-cross?
It is doing the cross and one F2L pair at the same time, with the pair already in its slot when the cross is finished. It requires planning both during inspection, which is why it is mostly used by advanced cubers.
Do I need a special cube for CFOP?
No, any 3x3 will do. A speed cube turns with less effort and helps you do algorithms smoothly, but the method is the same.
You can already practise in the simulator
Turn the layers with your finger, scramble the cube and try any algorithm step by step.
Keep learning
- Where do I start? Tell us what your cube looks like and we'll take you to the right lesson.
- Notation: what each letter means R, U, F, the prime and the 2, shown turning in 3D.
- Beginner's course Eight short lessons to solve the cube for the first time.
- Intermediate method (2-look OLL and PLL) The bridge between the beginner's method and CFOP.
- Roux method Blocks and the middle slice: fewer moves, a different way of thinking.
- Solving blindfolded The 3x3 without looking, with the Old Pochmann method.
- Solving one-handed How to hold the cube and which algorithms change.
- Fewest moves (FMC) Solving the 3x3 in as few moves as possible.
- Solving the 2x2 The pocket cube, in three steps.
- Solving the Pyraminx The pyramid, with its tips and centres in 3D.
- Solving the 4x4 The Revenge cube, by reduction.
- Solving the 5x5 The Professor's Cube, with the same method as the 4x4.
- Solving the Skewb The cube that turns around its corners, with two algorithms.
- Solving the Megaminx The 12-sided dodecahedron, layer by layer.
We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.
See cubes in the shop →