Rubik's Cube patterns step by step
With a solved cube and a short sequence you can draw checkerboards, spots, crosses or a small cube coming out of a corner. Here are 17 patterns ordered from the simplest to the most striking, each with its algorithm and a 3D cube that builds it in front of you.
F L F U' R U F2 L2 U' L' B D' B' L2 U
On this page
In short
- Every pattern starts from a solved cube held with white on top and green in front. With a different orientation you get the same shapes in other colors.
- Moves are counted in the half turn metric: R2 counts as one. The shortest one on this page, the checkerboard with slice moves, has 3.
- To solve the cube again, just do the inverse algorithm: read it from back to front and reverse the direction of each turn.
- The superflip leaves all twelve edges flipped and needs at least 20 moves. It was the first position proven impossible to solve in fewer.
- You can invent your own patterns by combining two algorithms, doing the inverse of a known one or trying short sequences of half turns.
How to make the patterns on your cube
A pattern is a position of the cube with a recognizable design on its faces. You get it the same way as any step of a solve: start from a solved cube and do a list of turns in order. If you can't yet read letters like R, U' or F2 with ease, first go over the notation guide.
- Always start with a solved cube. If one piece is out of place, the pattern comes out crooked.
- Hold it with white on top and green in front and don't rotate it in your hands until you finish. The colors we describe are the ones you see in that orientation.
- Use the step-by-step mode of the viewer if you get lost: compare your cube with the one on the screen after each turn.
- Count moves the way the viewer does. A face turn, whether a quarter turn or a half turn, counts as one. This is the half turn metric, abbreviated HTM.
If your cube has a different color scheme, the pattern will be the same but with different colors. The shape depends on which pieces move, not on the colors they carry.
Easy patterns: checkerboard, spots, Tetris and Ts
These five patterns take between 3 and 9 moves and almost all of them are based on turning opposite faces. They are the best ones to start with and to practice notation.
1. Checkerboard
This is the best-known pattern. Each face ends up like a chessboard: the center and the four corners keep their color and the four edges take the color of the opposite face. The white face fills with yellow, the green with blue and the red with orange. It is six half turns, so you don't have to worry about the direction of any turn.
The same pattern comes out with the three slice moves: M2 E2 S2. That brings it down to 3 moves, although turning the middle layers is a bit harder on the fingers.
2. Four spots
The top and bottom faces don't change. The four side faces take the color of the opposite face and only the center keeps its own, like a spot: the front face turns blue with a green spot and the right face orange with a red spot.
3. Six spots
Now all six faces have a spot. Each one is a single color except the center, which is a different one: on top you see a green face with a white spot, in front a red one with a green spot and on the right a white one with a red spot. If you repeat the algorithm three times, the cube is solved again.
With slice moves there is a 4-move shortcut, E M E' M', that moves only the centers. The result is the same pattern seen in other colors. Watch out: some lists give it as E M' E' M', and that version doesn't make the six spots, because it also scrambles edges.
4. Tetris
Each face splits into two L-shaped pieces of four squares, in two different colors, that fit around the center like Tetris blocks. On the front, for example, a red L takes the left column and the bottom middle square, and an orange one takes the rest: the two top right squares and the right column.
5. Six Ts
Each face shows a T in its own color on the color of the opposite face. On the front you see an upright green T, with the bar on top, surrounded by blue. On other faces the T lies on its side or upside down, depending on where it points.
Intermediate patterns: crosses and snakes
From here on the algorithms go past ten moves and mix quarter turns on several faces. Go slowly: a single turn in the wrong direction ruins the pattern.
6. Crosses on all six faces
Each face shows a cross in its own color, made of the center and the four edges, with the corners in another color. On top the corners are yellow and on the bottom white; in front, red. It is also known as the Christmas cross.
7. Six-two-one
The name describes how the colors are split: each face has six squares of one color, two of another and one of a third. On top, for example, there are six white, two green and one orange in the corner.
The snakes
There is a family of patterns with snake names in which a band of colors seems to crawl from one face to the next. The three that follow take between 13 and 14 moves.
8. Green mamba
On the top, front and right faces the middle row keeps the color of its face between two rows of another color: white between red, green between yellow and red between blue. On the other three faces the band bends and carries on.
9. Anaconda
On each face only three squares keep their color: the center and two edges that form an elbow. The rest of each face is split among other colors, and the six elbows together draw a band that winds around the whole cube.
10. Python
The four side faces have an elbow like the anaconda's. The difference is on the top and bottom: the white face ends up with three vertical stripes, white in the middle and yellow on the sides, and the yellow face with three horizontal stripes, the other way around.
Cube in a cube and block patterns
These patterns play with blocks of 2x2 squares. Seen diagonally, they create the illusion that a smaller cube is tucked inside the big one.
11. Cube in a cube
Look at the top front right corner: a 2x2x2 cube seems to come out of it. On the white face you see a white block of four squares surrounded by green; in front, a green one surrounded by red, and on the right, a red one surrounded by white. In the opposite corner of the cube, at the bottom back left, you get the hole that this small cube leaves. If you do the algorithm three times in a row, the cube is solved again.
12. Checkerboard with neighboring colors
This is another chessboard, but the edges take the color of a neighboring face instead of the opposite one: white is paired with green, green with red and red with white. Unlike the regular checkerboard, you have to repeat it three times to get back to the solved cube.
13. Exchanged peaks
Each face keeps six squares of its color, and the other three, a corner and the two edges touching it, form a step of another color, like a peak coming in from one side. That is where the name exchanged peaks comes from: on top the peak is yellow and in front it is orange.
The most striking patterns
The last patterns go past 16 moves. They will take you a bit longer, but they are the ones that catch the eye most on a shelf.
14. Stripes
The top and bottom don't change. The four side faces end up with three vertical stripes: the middle one is in the face's own color and the ones on the sides are from two other side faces. In front you see orange, green and red, and on the right blue, red and green, so the stripes seem to wrap around the cube.
15. Cube in a cube in a cube
This is the version with three sizes. In the same corner as the cube in a cube you get a 2x2 block and, at its tip, a single square of another color, so you see three cubes nested together: the 3x3, a 2x2 and a 1x1. On top, the square at the tip is green, the block white and the frame red. Many lists give an 18-move version that leaves the same position; the one here has one move fewer.
16. Centers, edges and corners
Each face has three colors split by type of piece: the center keeps its own, the four edges share a second color and the four corners a third. On top you see the white center, green edges and red corners. It looks like a checkerboard, but with three colors.
17. Superflip
At first sight it doesn't look like much: the centers and corners are in place and correctly oriented, and the twelve edges are also in place, but all of them flipped. On each face you see the center and corners in its color, and each edge shows the color of the neighboring face it points toward.
Its fame comes from mathematics. In 1992 Dik Winter found a way to reach it in 20 moves, and in 1995 Michael Reid proved that no shorter one exists. It was the first position known for certain to need 20 moves. In 2010 it was proven that no position needs more, so the superflip is among the farthest from the solved cube. You can read about it in the history of the Rubik's Cube.
The superflip is its own inverse: if you do the algorithm twice in a row, the edges get their orientation back and the cube is solved. Combined with the four spots pattern it gives a position that, in the quarter turn metric, where R2 counts as two, needs 26 moves, the maximum in that metric.
How to invent your own patterns
There is nothing special about the patterns on this page: they are cube positions that someone found pretty and then searched for in few moves. You can find your own with a few simple ideas.
Combine two patterns
Make one pattern and, without undoing it, make another on top. The result is almost never the sum of the two, and sometimes something new comes out. If you do the checkerboard and then the four spots, the top and bottom keep the chessboard and the four side faces show a cross in their own color with corners in the opposite color.
When you join algorithms, look for turns that cancel out. Here F2 B2 appears twice in a row and does nothing, and U2 D2 U D' reduces to U' D. The same pattern comes out with R2 L2 U' D R2 L2 U D', which has 8 moves instead of 14.
Do the inverse of a known pattern
You write the inverse by reading the algorithm from back to front and reversing the direction of each turn: R becomes R', R' becomes R and turns with a 2 stay the same. If the inverse doesn't give you back the solved cube, because you start from a solved cube, what it does is draw another version of the pattern. The inverse of the cube in a cube builds the small cube in the same corner, but changes the colors of the frame: the white block ends up surrounded by red instead of green.
Try half turns and opposite faces
- Half turns give symmetrical patterns. With only 180-degree turns the pieces don't twist, and the designs tend to repeat on opposite faces, as in the checkerboard.
- Pairs of opposite faces create spots and bands. Turning U and D' together, or R and L', moves the middle layer relative to the outer ones. That is why the six spots and the Tetris are based on those pairs.
- Repeat a short sequence. Doing a group of two or three turns three or four times in a row is a quick way to explore. Use repetition notation, as in
(R2 U2)3, and check at what point the solved cube comes back. - Write down everything you do. If you don't know which turns you made, you won't be able to repeat the pattern or undo it.
Tips and common mistakes
- To undo a pattern, do its inverse. It is faster than solving the cube with a method. For patterns that are their own inverse, like the checkerboard or the superflip, just repeat the algorithm.
- Don't go from one pattern to another without solving. The algorithms on this page start from a solved cube. If you do one on top of another pattern, the design changes.
- Check the orientation before the first turn. If you start with a different face in front, you'll get the same shape but in another corner or with other colors.
- Split up long algorithms. Memorize groups of four or five turns and check in the viewer that your cube matches at the end of each group.
- If the pattern comes out wrong, don't force the inverse. With a wrong turn in the middle, the inverse won't give you back the solved cube either. In that case, solve it with the beginner's method.
Patterns are also good practice for notation and finger work. Doing the checkerboard and the six spots a few times a day is a fun way to get used to turning opposite faces.
Frequently asked questions
What is the easiest Rubik's Cube pattern?
The checkerboard. It is six half turns, R2 L2 U2 D2 F2 B2, and the direction of the turns doesn't matter. If you repeat the sequence, the cube is solved again.
How do I solve the cube again after making a pattern?
Do the inverse algorithm: read it from back to front and reverse the direction of each turn. R becomes R', U' becomes U and turns with a 2 stay the same. If you got a turn wrong, you'll have to solve it with a method.
Why is the superflip famous?
Because it was the first position proven, in 1995, to need 20 moves in the half turn metric. Since 2010 we know that no position needs more than 20.
Do the patterns come out the same on every cube?
The shape is the same on any 3x3, but the colors depend on your cube's color scheme and on how you hold it at the start. The colors on this page are those of a cube with white on top and green in front.
Does R2 count as one move or two?
On this page, as one, which is the half turn metric. In the quarter turn metric R2 counts as two, and then the checkerboard has 12 moves instead of 6.
You can already practise in the simulator
Turn the layers with your finger, scramble the cube and try any algorithm step by step.
Keep learning
- 3D simulator Turn the layers with your finger, scramble, undo and try out algorithms.
- Cube solver Colour in your cube and choose: a quick solution or one explained step by step.
- Timer Official scrambles, inspection, averages and your progress.
- Algorithm trainer Drill OLL and PLL until they come without thinking.
- Recognition trainer Recognise the case by looking at only two sides, just like in a real solve.
We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.
See cubes in the shop →