Rubik's Cube
Esc

    Beginner course: solve the 3x3 Rubik's Cube

    Eight lessons to solve the cube for the first time with the layer-by-layer method. Each case has its own 3D cube, held just as you will see it in your hands, with the pieces that don't matter shown in gray.

    4 min read3 animated cubes

    (R U R' U')6

    On this page
    1. 1. What you will learn
    2. 2. The eight lessons
    3. 3. How long it takes
    4. 4. Which cube to use
    5. 5. How to hold it
    6. Frequently asked questions

    In short

    • The course follows the layer-by-layer method: first the white face, then the middle layer and finally the yellow face.
    • There are eight steps. The first two need no memorizing at all, and the rest use seven algorithms, the longest one eleven moves.
    • Throughout the course you will hold the cube the same way: yellow on top, white on the bottom and green in front.
    • Before you start, it helps to know how to read notation: R, U, F and the prime ('). There is a separate guide with every move animated.

    What you will learn

    By the end of the course you will be able to solve a 3x3 Rubik's Cube from any scramble. The method we follow is the layer-by-layer method, the one taught in the official Rubik's guide and in almost every beginner course: you solve the bottom layer, then the middle one and finally the top one.

    The sequence you will repeat most is R U R' U'. In the cube below you can see that it only moves a few pieces and that the white cross on the bottom stays in place.

    R U R' U' on a solved cube, with yellow on top and green in front: only a few pieces on the right move.

    The eight lessons of the course

    1. The daisy: the four white edges around the yellow center, like petals.
    2. The white cross: each petal goes down to its spot, next to the center of its color.
    3. First layer corners: repeating R U R' U' completes the first layer.
    4. The second layer: two algorithms, one to the right and one to the left, place the middle edges.
    5. The yellow cross: the dot, the L and the line turn into a cross with F R U R' U' F'.
    6. The yellow face: the Sune algorithm twists the corners until the whole face is yellow.
    7. Positioning the yellow corners: find the headlights, and one algorithm puts each corner in its place.
    8. The last edges: with the solved side at the back, the U perm finishes the cube.

    This is lesson 5: the yellow line on top becomes a cross and the two bottom layers stay untouched. Anything gray doesn't matter yet.

    Lesson 5: with the yellow line running from left to right, F R U R' U' F' makes the yellow cross.

    How long it takes to learn

    There is no fixed time: it depends on how much you practice. What works is not moving on to the next lesson until you can do the current one without looking at the screen. The official Rubik's guide gives the same advice: scramble and repeat each layer several times before going on.

    • Lessons 1 and 2: nothing to memorize. You understand them by looking at the cube, and most people get them in the first session.
    • Lessons 3 and 4: they rely on R U R' U' and on two eight-move algorithms that are very similar to each other.
    • Lessons 5 to 8: four new algorithms. Learn one, practice it until your hands do it on their own, then move on to the next.

    Which cube to use

    Any 3x3 cube with the standard color scheme will do: white opposite yellow, blue opposite green and red opposite orange. That is the scheme of the cubes in this course, so the colors in the examples will match yours.

    A cube that turns smoothly helps, because the layers don't get stuck halfway through a turn. If yours catches, finish each turn before starting the next one.

    How to hold the cube during the course

    Algorithms use letters that describe positions relative to you: R is the right face, U the top face and F the front face. If you don't know them yet, first read the Rubik's Cube notation guide, where every move has its own animated cube.

    In this course you hold the cube with the yellow center on top and the green center in front. White is on the bottom, orange on the right, red on the left and blue at the back. The white face is built on the bottom, so you never need to turn the cube upside down.

    • During an algorithm, the front face doesn't change. If you rotate the cube in your hands by accident, the algorithm fails.
    • When a lesson says “turn the top layer,” move only that layer with U. When it says “rotate the cube,” move the whole cube.

    This is how the course ends: in lesson 8 one algorithm places the three edges that are left.

    Lesson 8: with the solved side at the back, the U perm places the three remaining edges and the cube is solved.

    Frequently asked questions

    How many algorithms do I need to learn in this course?

    Seven: R U R' U' for the first layer corners, two for the second layer (one is the mirror of the other), F R U R' U' F' for the yellow cross, the Sune for the yellow face, one to position the yellow corners and the U perm for the last edges.

    Why does the course start with white?

    That is how the official guide and the best-known courses start, so the pictures of each case match the ones you will see elsewhere. The method works the same with any color.

    Can I use this method in competitions?

    It is for solving the cube and understanding how it works. Competition methods, such as CFOP, combine several of these steps and use more algorithms.

    What do I do if I mess up what I already had?

    Go back to the last step you had right. Each lesson has a section on common mistakes, such as a move done the wrong way or rotating the whole cube by accident.

    Beginner's course

    1. 1The daisy
    2. 2The white cross
    3. 3The white corners
    4. 4The second layer
    5. 5The yellow cross
    6. 6The yellow face
    7. 7Placing the yellow corners
    8. 8The last edges

    You can already practise in the simulator

    Turn the layers with your finger, scramble the cube and try any algorithm step by step.

    Open the simulator

    Keep learning

    We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.

    See cubes in the shop →