Rubik's Cube
Esc

    How to Solve a Megaminx Step by Step

    The Megaminx is solved with the same logic as the Rubik's Cube: one face, then the layers that follow, then the last face. If you already know how to solve the 3x3 layer by layer, almost every algorithm will look familiar. Here is the complete beginner's method, with a 3D Megaminx for every case.

    20 min read32 animated cubes

    (R U R' U')6

    On this page
    1. 1. What it is
    2. 2. Notation
    3. 3. The method
    4. 4. The star
    5. 5. White face
    6. 6. Second layer
    7. 7. Middle layers
    8. 8. Last layer: edges
    9. 9. Last layer: corners
    10. 10. Mistakes
    11. 11. Going faster
    12. Frequently asked questions

    In short

    • The Megaminx is a dodecahedron with 12 faces and 50 moving pieces: 20 corners and 30 edges. The 12 centers turn, but they never change places.
    • Steps 1 and 2: with white on top, build the white star without algorithms and place the five white corners with R' DR' R DR, repeated one to five times.
    • Step 3: with white on the bottom, the second layer is solved one slot at a time: the edge with F DR F' DR' F' DL' F DL or its mirror, and the corner with DR' F' DL' F DL DR.
    • Step 4: the middle layers (S2L) are done with algorithms of four to eight turns that look like the 3x3 ones, such as F L F2 L' F', R U R' U' and U R U' R' U' F' U F.
    • Step 5: on the last layer you orient the edges with F U R U' R' F', permute them with R U R' U R U2' R' U, permute the corners with R U2' L' U2 R' U2' L U2 and twist them with R' DR' R DR.

    What the Megaminx is and what pieces it has

    The Megaminx is a puzzle shaped like a dodecahedron: it has 12 pentagonal faces, each one a different color. Around 1981 and 1982, several people in Germany and Hungary designed almost identical puzzles and filed separate patents. The German inventor Uwe Mèffert later bought the rights to some of them and sells it under the name Megaminx. Since 2003 it has been an official event of the WCA, the association that runs competitions.

    Each face has 11 stickers: one center, five edges and five corners. In total you can see 62 pieces:

    • Centers (12). They turn in place, but they never change position. They set the color of each face, just like on the Rubik's Cube.
    • Edges (30). Two-colored pieces between two centers. They can be in the right spot but flipped.
    • Corners (20). Three-colored pieces where three faces meet. They can be in the right spot but twisted.

    That makes 50 moving pieces against 20 on the 3x3, but the logic is the same: each face turns on its own, there are no pieces that split into inner layers, and the cube algorithms work almost the same way. What changes is that every turn is 72 degrees (one fifth of a full turn) and that there are more layers to solve. It can reach around 1068 different states, although to solve it you only need to go piece by piece.

    Most Megaminxes have 12 colors, with white opposite gray. There are also six-color versions, where opposite faces share a color: they are harder at the end, because some edges look identical and, if you swap them, the last layer will not come out. To see where the Megaminx fits among other puzzles, check the guide to types of cubes.

    Megaminx notation

    The algorithms in this guide use letters for the 12 faces, always based on how you are holding the Megaminx. If you don't know cube notation, read the notation guide first: it works the same way here, just with more faces.

    • U is the top face and D is the bottom face.
    • There are five faces around U. Seen from above and going clockwise, they are F (front), R (right), BR (back right), BL (back left) and L (left).
    • There are another five around D. Each one is opposite one of the top faces: B is opposite F, DBL is opposite R, DL is opposite BR, DR is opposite BL and DBR is opposite L.
    • With the Megaminx in front of you, DL and DR are the two bottom faces that touch F: DL sits down on the left and DR down on the right. DR also touches R, and DL also touches L.

    A letter on its own is a 72-degree clockwise turn, looking straight at that face. The prime (') is the same turn the other way. U2 is two turns in a row, 144 degrees, and U2' is 144 degrees the other way. There is no half turn on the Megaminx: five turns bring the face back to where it started, so three turns one way equal two turns the other way. That is why some guides write U3 where this one says U2'.

    R: the red face turns 72 degrees and the green from the front moves up to the white face.

    Rthe right face

    It turns like R on the cube: the front part moves up toward the top face.

    R': the white on top moves down to the green face and the blue moves onto the white face.

    R'the same face the other way

    U2: two fifths of a turn. The blue, which was at the back right, reaches the front face.

    U and U2the top face

    U moves the top layer from right to left, seen from the front. U2 moves it twice as far.

    DR: the pink face at the bottom right turns. The cream moves up to the green face and the green moves onto the red one.

    DRa bottom face

    The bottom faces turn the same way, looking straight at them. DR is used a lot in this guide because it is the face right below the front right corner.

    The colors of the 3D Megaminx

    On the Megaminxes in this guide, U is white, F green, R red, BR blue, BL yellow and L purple. Underneath, D is gray, B light green, DBL orange, DBR light blue, DL cream and DR pink. If your Megaminx has different colors, go by the positions, not the colors.

    The notation of official scrambles

    In competition, scrambles don't use these letters. The WCA regulations use a different notation: U and U' turn the top face, and R++ and D++ turn almost the whole Megaminx 144 degrees at once, vertically or horizontally, leaving a single layer still. With two minus signs instead of two plus signs, the turn goes the other way. Scrambles are done with white on top and green in front. You don't need it to solve the puzzle, and the 3D Megaminx in this guide doesn't show it.

    The layer-by-layer method in five steps

    The beginner's method solves the Megaminx from the white face toward the opposite face, like the 3x3 beginner's course. The difference is that there are more layers between the first and the last face: the second layer and two more in the middle.

    StepWhat you getAlgorithms
    1. StarThe 5 white edges around the white centerNone; if an edge comes out flipped, F U' R U
    2. White faceThe 5 white cornersR' DR' R DR
    3. Second layer5 edges and 5 corners next to the white faceF DR F' DR' F' DL' F DL, its mirror and DR' F' DL' F DL DR
    4. Middle layers (S2L)10 edges, 5 corners and 5 more edgesF L F2 L' F', F L F' L' F', their mirrors, R U R' U' and U R U' R' U' F' U F
    5. Last layerStar, edges in place, corners in place and twistedF U R U' R' F', R U R' U R U2' R' U, R U2' L' U2 R' U2' L U2 and R' DR' R DR

    How to hold it at each step

    In steps 1 and 2 you have the white face on top, and the 3D Megaminx shows it the same way: white on top and green in front. From step 3 on you turn it over: white on the bottom, so you can see the pieces you still have to solve. Almost every guide works like this, because hunting for pieces underneath is hard work.

    The 3D Megaminx in this guide always has white on top. From step 3 on, think of the gray face at the bottom as your white face and of the white face on top as your last layer. The positions and the letters of the algorithms match what you have in your hands; only the colors change.

    Don't change your front face during an algorithm. Between one algorithm and the next, you can turn the whole Megaminx to bring the case to the front.

    Step 1: the white star

    Hold the Megaminx with the white center on top. The goal is to place the five white edges around it so that they form a five-pointed star. Each edge has to match in both colors: white on top and the other color with the center of the face next to it. The white and green edge goes between white and green, the white and red one between white and red, and so on for all five.

    This step needs no algorithms. Find a white edge, see where it has to go and bring it there in a few turns. It is tricky at first because there are so many faces, but the situations are always similar.

    The white and green edge is at the bottom of the green face, with green on that face: F2 brings it up to the star.

    The edge is on the face it belongs to

    If the white and green edge is on the green face, with green on that face, turn F until it reaches the top. Two turns are always enough.

    The white and green edge is on the pink face. DR' leaves it at the bottom of the green face and F2' brings it up.

    The edge is in the bottom half

    The bottom faces (B, DBL, DL, DR, DBR and D) don't touch the white face. You can turn them as much as you like without breaking the star. Turn the one that holds the edge until it sits under its face, with the right color on that face, and bring it up.

    The edge is in place, but flipped

    If the white of the edge points to the front instead of up, put it in front and do F U' R U. It is the same fix as on the 3x3 cross: U' moves the edge on the right out of the way so that R doesn't mess it up, and U puts it back.

    The white and green edge is in place with white in front: F U' R U flips it without moving the rest of the star.

    If a white edge is in the star but in another edge's spot, take it out by turning its side face and then place it like any other. At the end, check that the five side colors match their centers.

    Step 2: the corners of the white face

    Keep white on top. Now the five white corners are missing. Each one has a spot between two edges of the star: the white, green and red one goes between the white and green edge and the white and red one.

    Find the corner in the bottom half and turn the bottom faces until it sits right below its spot. For the white, green and red corner, that point is the corner of the green face that touches the red one and the pink one (DR). Put its spot at the front right and repeat R' DR' R DR until it goes in. It is the Megaminx version of the 3x3 R' D' R D: here the face that plays the part of D is DR, the one right below the corner.

    • White facing right (on the red face): once.
    • White facing down (on the pink face): three times.
    • White facing you (on the green face): five times.
    The white, green and red corner is below its spot with white on the right: R' DR' R DR once.
    With white facing down, toward the pink face, it takes three repetitions.
    With white facing you, five repetitions. The star and the other white corners don't move.

    The corner is in place, but twisted

    If the corner is already in its spot but white isn't facing up, put it at the front right and do R' DR' R DR twice if white faces right, or four times if it faces you. If it is in another corner's spot, do R' DR' R DR once to bring it down and then place it like the others.

    Corner in place with white on the right: two repetitions fix it.

    When you finish step 2 you have the whole white face and, on each face around it, a strip of three stickers of the same color. If a strip doesn't match, a piece is in another piece's spot.

    Step 3: the second layer

    Turn the Megaminx over: white on the bottom. From here on, the gray face at the bottom of the 3D Megaminx stands in for your white face, so go by the positions, not the colors.

    The second layer is made of five slots, one under each top face. Each slot has two pieces: a vertical edge that rises from a white corner, between two bottom faces, and the corner right above it. With F in front, the slot is under the bottom tip of F: the edge goes between DL and DR, and the corner between F, DL and DR. First you place the edge and then the corner.

    While you work on a slot you only turn F and the two bottom faces, DL and DR. The algorithms leave the white face and the other slots as they were.

    The edge of the slot

    It is the same algorithm as the second layer of the 3x3, U R U' R' U' F' U F, with F playing the part of U, DR of R and DL of F. Turn F until the edge sits on one of the two bottom edges of F, with the color of the bottom face it touches in its place:

    • On the bottom left edge of F, with its DL color touching DL: F DR F' DR' F' DL' F DL.
    • On the bottom right edge of F, with its DR color touching DR: F' DL' F DL F DR F' DR'.
    The cream and pink edge is at the bottom left of the green face, with cream touching the cream face: the algorithm puts it into the slot.
    The same edge, at the bottom right of the green face and with pink touching the pink face: the mirror algorithm.

    If the edge is on F but the wrong color is touching, turn F to the other bottom edge: one of the two cases always fits. If it is on another top face, turn that face or U to move it to F, but only if that face's slot is still empty. If it is stuck in another slot or flipped in its own, do the algorithm on that slot with any other edge to take it out.

    The corner of the slot

    Bring the corner to the right corner of F, the one that touches R and DR, by turning F. If it isn't on F, move it there first with U or with the face it is on, just like the edge. If the F color already faces F, one more turn of F is enough and the corner drops in by itself. If not, repeat DR' F' DL' F DL DR until it goes in:

    • F color facing down, toward the DR face: three times.
    • F color facing right, toward the R face: five times.
    • If it is already in the slot but twisted, two or four times.
    The green, cream and pink corner is on the right of the green face with green facing the pink face: three repetitions.
    With green facing the red face, five. The edge you have just placed doesn't move.

    When you finish a slot, turn the whole Megaminx to bring the next top face to the front and repeat. After all five, each bottom face is only missing the three pieces at its top tip.

    Step 4: the middle layers (S2L)

    Keep white on the bottom. Between the second layer and the last layer there are three groups of pieces left. They are solved in this order, because each group uses algorithms that only mess up what is still unsolved:

    1. The 10 edges that join a top face with a bottom face, two for each top face.
    2. The 5 corners that touch two top faces and one bottom face.
    3. The 5 edges between two top faces, which are exactly the second layer of the 3x3.

    From here on, the only free face is U, the top one: that is where you look for pieces, and you turn it to set them up before each algorithm.

    The edges between a top face and a bottom face

    Each top face has two of these edges on its lower sides. With F in front, they are the F and DL edge (bottom left) and the F and DR edge (bottom right). Look on U for an edge with the F color and check which way that color is facing.

    If the F color is on the side, turn U until the edge sits above F, over its center. Depending on the color left on top, it goes to the bottom right or the bottom left:

    • To the bottom right (F and DR): F L F2 L' F'.
    • To the bottom left (F and DL): F' R' F2' R F.
    The green and pink edge is above the green face, with pink on top: F L F2 L' F' brings it down to the right.
    The green and cream edge, with cream on top: F' R' F2' R F brings it down to the left.

    If the F color is facing up, place the edge above the side face opposite the slot:

    • To the bottom right: edge above L, with the DR color on L. Do F L F' L' F'.
    • To the bottom left: edge above R, with the DL color on R. Do F' R' F R F.
    The green and pink edge is above the purple face, with green on top: F L F' L' F' takes it to the bottom right of the green face.
    The green and cream edge above the red face, with green on top: F' R' F R F.

    These four algorithms only move pieces on the top face, the edges between top faces and the corners of the next group. That is why you have to do the ten edges before those corners.

    The corners between two top faces and one bottom face

    It works just like the white corners on the 3x3. The green, red and pink corner goes between F, R and DR. Turn U until it sits above its spot, at the front right, and repeat R U R' U':

    • Bottom face color (DR) facing right: once.
    • Facing up: three times.
    • Facing you: five times.
    • If it is already in place but twisted: two or four times.
    The green, red and pink corner is on top, with pink facing up: R U R' U' three times.
    With pink facing you, five times. The edges of the previous group don't move.

    The edges between two top faces

    These are the 3x3 second layer, with nothing changed. Turn U until the edge sits above its face, with that face's color on the side. If the other color has to go to the right, U R U' R' U' F' U F; if it goes to the left, U' L' U L U F U' F'.

    The green and red edge is on top, with green in front and red on top: it goes to the right.
    The green and purple edge, with purple on top: it goes to the left with the mirror algorithm.

    If a piece from these three groups is stuck in a spot that isn't its own, or is flipped, do the algorithm for that spot with any other piece from the top face. The piece comes out to U and you place it afterwards.

    Step 5: the last layer, edges

    Only the top face is left: five edges and five corners. On the 3D Megaminx it looks white, but on yours it is the face opposite white, usually the gray one. It is solved in four parts, like the last layer of the 3x3: orient the edges, permute them, permute the corners and twist them.

    The top star

    First you have to get all five edges with the top color facing up, even if they aren't in their spots yet. There is always an even number of flipped edges: two, four or none. You use the two algorithms of the 3x3 yellow cross:

    • Two adjacent flipped edges: turn U until they are at the front and on the right, and do F U R U' R' F'.
    • Two separate flipped edges: one at the front and the other at the back right. Do F R U R' U' F'.
    • Four flipped edges: leave the good one on the left and do F R U R' U' F'. You are left with two adjacent flipped edges.
    Two adjacent flipped edges, at the front and on the right: F U R U' R' F' flips them.
    Two separate flipped edges, at the front and at the back right: F R U R' U' F'.
    Four flipped edges with the good one on the left: F R U R' U' F', U2 to bring the two that are left to the front and the right, and F U R U' R' F'.

    Both algorithms only move pieces on the top face. Everything you have solved underneath stays in place.

    Permuting the edges

    Now the edges also have to match the color of each side face. Turn U looking for the position with the most edges in the right place. If all five match, move on to the corners. If two adjacent ones match, put those two on the right (on R and BR). The other three, at the front, on the left and at the back left, are cycled with one of these algorithms:

    • R U R' U R U2' R' U: the front edge goes to the left, the left one goes to the back left and that one comes to the front.
    • U' R U2 R' U' R U' R': the same cycle in the opposite direction.

    Look at the front edge: if its spot is on the left, use the first one; if it is at the back left, the second one. The first one is the 3x3 Sune with U2' instead of U2 and a U at the end.

    The red and blue edges are correct. The front one goes to the left: R U R' U R U2' R' U.
    The opposite case: the front edge goes to the back left. U' R U2 R' U' R U' R'.

    If there are no two adjacent correct edges in any position of U, put one correctly placed edge on the right, do R U R' U R U2' R' U and turn U again looking for two adjacent ones. If they still don't show up, repeat it with another correctly placed edge on the right.

    These algorithms mess up the top corners. That doesn't matter: they get placed in the next step.

    Step 5: the last layer, corners

    Permuting the corners

    A corner is in the right place when it sits between the three faces of its colors, even if it is twisted. Here you can no longer turn U to compare, because the edges are in place: check which corners are correct with the Megaminx just as it is.

    The algorithm is R U2' L' U2 R' U2' L U2. It cycles three corners and touches nothing else: the front right one moves to the back right, that one moves to the back corner, between BR and BL, and that one returns to the front right. The two corners on the left, the front one and the back one, don't move.

    • Two adjacent correct corners: turn the whole Megaminx to leave them on the left and do the algorithm once. If the other three are still wrong, do it again.
    • Any other case: do the algorithm with the Megaminx in any position and look again. If there are still no two adjacent correct corners, repeat it from another position.
    The two corners on the left are correct and the other three cycle among themselves: R U2' L' U2 R' U2' L U2 places them.

    Done three times in a row, this algorithm leaves everything as it was. That is why doing it twice is the same as doing it in reverse. It is the same idea as the algorithm for the 3x3 yellow corners, with U2 and U2' instead of quarter turns.

    Twisting the corners

    Last step. Put a corner with the top color facing sideways at the front right and do R' DR' R DR two at a time until that color faces up:

    • Top color facing right: twice.
    • Top color facing you: four times.

    Then turn only U to bring the next twisted corner to the same spot, at the front right, and repeat. Don't turn the whole Megaminx or change your front face until you finish. In the meantime, the bottom layers get scrambled: that is normal. When the last corner is right, everything underneath goes back into place and all that is left is to turn U.

    On a solved Megaminx, two repetitions twist the front right corner and scramble pieces underneath. They go back into place as you twist the other corners.
    Two twisted corners: two repetitions on the first one, U to bring the second, four repetitions and U' to finish.
    Three corners twisted the same way: two repetitions on each one and U between them.

    Common mistakes and how to avoid them

    • Mixing up U2 with a half turn. On the Megaminx, U2 is 144 degrees, two fifths of a turn. If you turn 180 degrees like on the cube, the face ends up crooked and you can't go on.
    • Turning the whole Megaminx in the middle of an algorithm. With 12 faces it is easy to lose track of which one was F. Before you start, note the color of the front face and the color of the top face.
    • Building the star with edges that only match on white. Each edge also has to match its side face. Otherwise the white face will come out wrong and you will have to undo it.
    • Breaking finished slots while looking for pieces. In step 3 you can only turn freely the top faces whose slot is empty. In step 4 the only free face is U.
    • Changing the order of step 4. The algorithms for the edges between top and bottom faces mess up the corners of the next group. If you do the corners first, you lose them.
    • Panicking while twisting the final corners. With R' DR' R DR the bottom layers get scrambled until you finish the last corner. If you turn the Megaminx or stop halfway, they won't come back on their own.
    • Repeating an algorithm with the wrong face in front. On the last layer, each algorithm needs the pieces in a specific spot. Set up the case as on the 3D Megaminx before you start.

    The fastest way to learn is the same as on the 3x3: don't move on to the next step until the current one comes out without looking. You can practice the turns on the simulator and time yourself with the timer.

    After the layer-by-layer method: going faster and records

    Competitors don't use this exact order. They build the star and the white face almost at the same time, solve the second layer in corner and edge pairs, as in the CFOP method, and fill in the middle layers in blocks, face by face, without so many algorithms. They finish the last layer in two or four stages with algorithms similar to those of OLL and PLL.

    A good intermediate step is to learn to orient the five top edges at once and to permute the corners and edges with algorithms that don't mess up the rest. That way the last layer goes from four stages to two.

    World records

    EventTimeWho and where
    Single21.04 sZiyu Wu (China), Quanzhou Summer 2026, 30 May 2026
    Average of 523.40 sTimofei Tarasenko (Russia), Kuala Lumpur Cubing Challenge 2026, August 2026

    The average of 5 drops the best and the worst time and averages the other three. You can find the records for every event on the records page.

    If you like the Megaminx, it has siblings with the same shape: the Kilominx, with corners only, and the Gigaminx, with five layers per face. If you are looking for another puzzle at a similar level, take a look at the 5x5 cube or the guide on which cube to buy.

    Frequently asked questions

    Is the Megaminx harder than the Rubik's Cube?

    It is longer, not much harder. It has 50 moving pieces against 20, but it is solved with the same layer idea, and most of the algorithms are the 3x3 ones with small changes.

    How many algorithms do you need?

    With this method, seventeen, almost all of them similar to the 3x3 ones: one for a flipped star edge, R' DR' R DR for the white face, three for the second layer, seven for the middle layers and five new ones for the last layer, which also reuses R' DR' R DR.

    Do I need to know how to solve the 3x3 first?

    It isn't required, but it helps a lot. The steps and the notation are the same, and if you already know the second layer, the yellow cross and the Sune from the 3x3, you only have to adapt them.

    What does U2 mean on the Megaminx?

    Two 72-degree turns in a row, 144 degrees in total. U2' is 144 degrees the other way. There is no half turn, because the face has five sides.

    Why does everything get scrambled when you twist the last corners?

    Because R' DR' R DR moves pieces underneath as well as the corner. When all the top corners are twisted correctly, those changes cancel each other out and everything goes back into place. That is why you shouldn't turn the whole Megaminx until you finish.

    What is the Megaminx world record?

    21.04 seconds for a single solve, by Ziyu Wu in 2026, and a 23.40-second average, by Timofei Tarasenko, also in 2026.

    You can already practise in the simulator

    Turn the layers with your finger, scramble the cube and try any algorithm step by step.

    Open the simulator

    Keep learning

    We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.

    See cubes in the shop →