Rubik's Cube
Esc

    How to Solve a Pyraminx Step by Step

    The Pyraminx is solved in four steps: the tips, the centers, the first layer and the three top edges. The first two need no algorithms, and the rest is done with sequences of three to eight turns. Every case here has its own 3D Pyraminx, set up just as you'll have it in your hands.

    11 min read13 animated cubes

    R U R' U R U R'

    On this page
    1. 1. What it is
    2. 2. Notation
    3. 3. The method
    4. 4. The tips
    5. 5. The centers
    6. 6. First layer
    7. 7. Last layer
    8. 8. Tips
    9. 9. Faster
    10. 10. What to buy
    11. 11. In numbers
    12. Frequently asked questions

    In short

    • The Pyraminx has 4 tips, 4 centers and 6 edges. The tips and the centers never change places: they only rotate.
    • Step 1, the tips: turn each one until it matches the center below it. One turn is enough.
    • Step 2, the centers: with the vertex that has no yellow on top, make a yellow triangle on the bottom.
    • Step 3, the first layer: each yellow edge goes in with L' U L, R U' R' or R' L R L'.
    • Step 4, the last layer: line up the top center, place the edges with R U R' U R U R' or its mirror and flip the ones that are backward with R' L R L' U L' U' L.

    What the Pyraminx is and what pieces it has

    The Pyraminx is a puzzle shaped like a tetrahedron, a pyramid with a triangular base. It has four faces, each one a different color and divided into nine triangles. It was invented by the German Uwe Mèffert around 1971 and patented in 1981, in the middle of the Rubik's Cube craze. Today it is one of the official events of the WCA, the association that runs competitions.

    It is solved with the same idea as the cube, first one layer and then the other, but before you start it helps to tell its three kinds of pieces apart:

    • Tips (4). The small triangles at each vertex. They turn on their own, without moving anything else.
    • Centers (4). They sit under each tip and have three colors. They are attached to the axis of the vertex, which is why they are also called axial pieces: they never change places, they only rotate.
    • Edges (6). The two-colored pieces between two vertices. They are the only pieces that travel from one spot to another, and they can end up with their colors backward.

    There is no fixed piece in the middle of each face here. Each face has three center triangles, one for each vertex that touches it, and the color of the face is set by its centers. To see how the Pyraminx fits in with other puzzles, check the guide to types of cubes.

    Pyraminx notation

    Hold the Pyraminx with the yellow face on the bottom and the green one at the front; red is then on the left and blue on the right. Each vertex has its own letter: U on top, L front left, R front right and B at the back.

    A capital letter turns the layer of that vertex: the tip, the center and the three edges around it. It is a third of a turn clockwise, looking straight at the vertex from outside. The prime (') is the same turn the other way, and a lowercase letter (u, l, r, b) moves only the tip. There are no half turns: two turns one way equal one turn the other way. More details in the notation guide.

    R: the yellow from the bottom comes up onto the green face, on the right side.

    Rthe front right layer

    The right vertex turns as if the yellow on the bottom were coming up at the front. The green in that area moves to the blue face.

    R': the blue from the right face reaches the green face and the green goes down to the bottom.

    R'the same layer the other way

    The green goes down to the bottom and the blue comes to the front. L does the same on the left, and U moves the top layer from right to left, seen from the front.

    u: the top tip turns on its own and the blue from the right shows up on the green face.

    uonly the top tip

    Lowercase letters only move the small triangle at the vertex and don't scramble anything else.

    The layer-by-layer method in four steps

    The beginner's method solves the Pyraminx one level at a time. First the parts that need no algorithms, the tips and the centers; then the yellow bottom with its three edges, and finally the three top edges.

    StepWhat you getTurns or algorithms
    1. TipsEach tip with the colors of its centerSingle u, l, r, b turns
    2. CentersA yellow triangle on the bottomSingle L, R, B turns
    3. First layerThe whole yellow faceL' U L, R U' R' or R' L R L'
    4. Last layerThe top center and the three edgesR U R' U R U R', its mirror and R' L R L' U L' U' L

    Step 1: the tips

    Look at a tip. It has three colors, one on each face it touches. Right below it is its center, which also has three colors. Turn the tip until on each face the color of the tip is the same as the color of the center below. Repeat with the other three.

    A tip only has three positions, so one turn one way or the other is enough. And since the layers carry the tip along with its center, a tip that is in place won't get messed up again.

    The four tips out of line: one turn on each and they all match their center.

    Step 2: the centers

    Now for a yellow triangle on the bottom. The centers never change places, you only have to turn them. Of the four, one has no yellow: the one on the vertex opposite the yellow face. With the tips already done, it is the tip with no yellow. Hold the Pyraminx with that vertex on top.

    Turn each bottom layer, L, R or B, until its center has the yellow facing the bottom; at most one turn each. When you are done, each side face will have its two bottom centers in the same color, and that is its color.

    The three bottom centers with the yellow facing the sides: one turn of L, R' and B and the bottom forms the yellow triangle.

    The top center doesn't matter yet. You will place it at the start of the last step with a single U turn.

    Step 3: the first layer

    The three yellow edges are still missing. Each one goes between the bottom and the face of its other color. Place them one at a time, with yellow on the bottom and the face of the edge's color at the front: for the yellow and green edge, the green face. For the others, turn the whole Pyraminx without lifting the bottom.

    If the edge is on top, turn the top layer (U) until it sits in one of the two front positions and look at where its yellow is. There are three cases. In the examples only the yellow and green edge matters.

    Case 1: green at the front, edge on the right

    The green of the edge is on the green face and the yellow faces right: L' U L. L' brings the empty slot of the bottom up to the top left, U takes the edge to it and L brings them down together.

    The yellow and green edge at the top right, with the green on the green face: L' U L puts it into the bottom.

    Case 2: green at the front, edge on the left

    The same case mirrored, with the right hand: R U' R'. R brings the slot up on the right, U' takes the edge there and R' brings it down.

    The yellow and green edge at the top left, with the green at the front and the yellow facing the red face: R U' R'.

    Case 3: yellow facing you

    With the edge at the top right and the yellow at the front, do R' L R L'. Its shape is like the sledgehammer on the 3x3 (R' F R F'), so that is what we'll call it here. If the edge is on the left, use the mirror: L R' L' R.

    The yellow and green edge at the top right with the yellow facing you: the sledgehammer R' L R L' puts it in its place.

    If the edge is already on the bottom, but wrong

    It can be in its slot with the yellow at the front, or in another edge's slot. Put that slot at the front and do R U' R': the edge goes up and you can place it like any other. If it was flipped in its own slot, it ends up at the back, and L' U' L puts it in correctly.

    The yellow and green edge in its slot but flipped: R U' R' takes it out and L' U' L puts it back in, now facing the right way.

    These algorithms only move the top layer and the slot you are filling: the yellow edges already in place are not touched.

    Step 4: the last layer

    What is left is the top layer: its center, which carries the tip, and three edges. First you line up the center, then you place the edges and finally you flip the ones that are backward.

    U places the top center: each face ends up with its three centers in the same color, even though the edges are still swapped.

    Line up the top center

    Turn the top layer until its center has, on each face, the color of the two centers below it. It takes one turn, U or U'.

    Place the three edges

    Each top edge goes between the two faces of its colors: green and red at the front left, green and blue at the front right, and red and blue at the back. For now, look only at the position, not at whether they are backward. You will see that either all three are in place or none are. If none are, look at the one at the front left:

    • If it is the green and blue edge, which goes on the right: R U R' U R U R'. The edge on the left moves to the right, that one goes to the back and the one at the back comes to the left.
    • If it is the red and blue edge, which goes at the back: the mirror, L' U' L U' L' U' L, which moves them the other way.
    At the front left is the green and blue edge, which goes on the right: R U R' U R U R' places all three.
    At the front left is the red and blue edge, which goes at the back: the mirror, L' U' L U' L' U' L.

    Both alternate a bottom layer with the top one, which always turns in the same direction. Done three times in a row, the same algorithm leaves the Pyraminx as it was.

    Flip the edges that are backward

    With the edges in place, two of them may have their colors backward; never just one or all three. Turn the whole Pyraminx, with yellow on the bottom, until the good edge is at the back, and do R' L R L' U L' U' L: the sledgehammer followed by U L' U' L.

    The two front edges in place but backward: R' L R L' U L' U' L flips them and the Pyraminx is solved.

    The mirror does the same with the other hand: L R' L' R U' R U R'. If no edge is backward, you are done.

    With practice you will spot cases that can be solved in one go: L R U R' U' L', for example, places and flips edges in a single algorithm. You don't need it to get started.

    Tips and common mistakes

    • Mixing up a layer and a tip. When you turn a layer, hold the whole vertex. If only the small triangle moves, you have done a lowercase turn.
    • Lifting the bottom. In steps 3 and 4 the yellow always stays on the bottom. To turn the whole Pyraminx, do it on the table, like a plate.
    • Seeing only one or two top edges out of place. That doesn't happen on a correctly assembled Pyraminx. Check the colors again in good light.
    • Seeing a single flipped edge. That doesn't happen by turning layers either: the Pyraminx was taken apart and put back together wrong, and you have to turn that piece by hand.
    • Rushing. Do each algorithm slowly until you can do it without looking. If you make a mistake halfway through, undo the last two or three turns.

    You can do steps 1 and 2 in whichever order you like. What matters is having both done before you start on the edges.

    Faster: L4E, top first and 1-flip

    Once the layer-by-layer method comes naturally, the usual next step is the methods that start with a V: a center with two of its edges. The best known is L4E (last four edges): tips, the V and the four remaining edges with a single algorithm from a list. It is very similar to the first layer in this guide, with one edge fewer.

    The other family is top first, which starts with three edges around a center. It includes 1-flip, which leaves two edges solved and the third one flipped on purpose, Keyhole, which inserts edges through a free slot in the bottom, and OKA. You don't need any of them to get started.

    Which Pyraminx should you buy?

    Any Pyraminx with the usual colors will do for learning: yellow, green, red and blue, the ones in this guide. Keep an eye on this:

    • Magnetic or not. Magnets help each layer stop lined up and catch less. Non-magnetic ones are cheaper and work just as well for learning.
    • Size. You should be able to hold it firmly in one hand while you turn with the other; very small ones slip through your fingers.
    • Stickers or colored plastic. Colored plastic doesn't peel off; stickers can be replaced if they wear out.

    If you can't decide between the Pyraminx and another puzzle, the guide on which cube to buy has the criteria for choosing.

    Pyraminx in numbers

    FactValue
    Pieces4 tips, 4 centers and 6 edges
    Positions not counting the tips933,120
    Positions counting the tips75,582,720
    Maximum turns to solve it, not counting the tips11
    InventorUwe Mèffert, patented in 1981

    The 933,120 positions work out like this: the six edges can be arranged in 360 ways, half of 720; their flips give 32 combinations, because backward edges come in pairs; and the four centers, with three positions each, give 81. With the tips, you multiply by 81 again.

    It is one of the fastest puzzles to solve in competition: the single record is already under one second. There is a cousin without tips, the Tetraminx, which is solved the same way by skipping step 1.

    Frequently asked questions

    How many algorithms do you need to solve the Pyraminx?

    With this method, three for the first layer (L' U L, R U' R' and R' L R L') and two for the last one: R U R' U R U R', with its mirror, and R' L R L' U L' U' L. The tips and the centers don't need any.

    Is the Pyraminx easier than the Rubik's Cube?

    Yes. It has far fewer positions than the 3x3, no scramble needs more than 11 turns not counting the tips, and two of the four steps are done without algorithms.

    What is the difference between U and u?

    U turns the whole layer of the top vertex: tip, center and three edges. The u turns only the tip. The same goes for L and l, R and r, B and b.

    Why do you start with the tips?

    Because turning them doesn't move anything else and they never need more than one turn. Once they are lined up, they travel with their center and don't get messed up.

    What do I do if only one edge is flipped?

    You can't get to that situation by turning layers: backward edges come in pairs. The Pyraminx was taken apart and put back together wrong; turn that edge by hand.

    How many combinations does the Pyraminx have?

    933,120 not counting the tips. With their turns, 75,582,720.

    Which method should I learn next?

    L4E: tips, a V with a center and two edges, and the four remaining edges with a single algorithm. Top first methods, like 1-flip or Keyhole, start with the three top edges.

    You can already practise in the simulator

    Turn the layers with your finger, scramble the cube and try any algorithm step by step.

    Open the simulator

    Keep learning

    We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.

    See cubes in the shop →