Rubik's Cube
Esc

    Where do I start with the Rubik's Cube?

    What you should learn depends on where you are: never having solved it is not the same as getting under a minute. Find your level and you will see what to learn now, in what order, how long it usually takes and a tip so you don't get stuck.

    8 min read5 animated cubes

    (R U R' U')6

    On this page
    1. 1. Your level
    2. 2. From scratch
    3. 3. With a cheat sheet
    4. 4. Over 2 minutes
    5. 5. Under 1 minute
    6. 6. I want to compete
    7. 7. Which cube
    8. Frequently asked questions

    In short

    • If you have never solved it, start with the notation and follow the eight lessons of the beginner's course, one after another.
    • If you solve it with the cheat sheet in front of you, the next step is to memorize the seven algorithms from the course, one at a time.
    • If you solve it from memory but take more than 2 minutes, the intermediate method shortens the cross and solves the last layer with 16 algorithms.
    • Under a minute, it's time for CFOP: intuitive F2L first, then the 21 PLLs and the 57 OLLs. Roux is the alternative.
    • To compete you don't need to be fast: you just need to know the basic WCA rules and sign up for a competition.

    Choose your starting point

    Each level builds on the previous one. If you are torn between two, stay on the lower one: going over what you already know costs little and avoids gaps that slow you down later. To find your real time, do five solves with the timer and look at the average.

    Your situationWhat to learn nowPage
    I've never solved itNotation and the layer-by-layer methodBeginner's course
    I solve it with a cheat sheetMemorize the course algorithmsCheat sheet
    From memory, over 2 minutesDirect cross and last layer in 4 stepsIntermediate method
    Under 1 minuteFull F2L, PLL and OLLCFOP
    I want to competeRules, inspection and averagesTimer

    I've never solved it

    Before you touch an algorithm, learn to read them. Notation uses one letter per face: R is the right face, U the top, F the front, and the prime (') means turning the other way. With that you can follow any guide.

    R U R' U' on a solved cube: four turns that only mix up a few pieces on the right and on top.

    Then follow the beginner's course in order. There are eight lessons:

    1. The daisy
    2. The white cross
    3. The white corners
    4. The second layer
    5. The yellow cross
    6. The yellow face
    7. Placing the yellow corners
    8. The last edges
    Lesson 2: from the daisy to the cross. Each petal is lined up with its center by turning the top layer and then goes down with a half turn.

    How long it takes: it depends on how much you practice, so there is no fixed number. The first two lessons have nothing to memorize and usually click in the first session; the other six have seven algorithms in total and go more slowly. If you get stuck in the middle of a step, the simulator lets you repeat it without worrying about scrambling your cube.

    Don't move on to the next lesson until the current one works several times in a row without looking at the screen. Moving ahead with a half-learned step is the most common way to end up lost on the last layer.

    I can solve it, but with the cheat sheet in front of me

    You know the method; now it needs to live in your hands. The seven algorithms from the course are all together on the cheat sheet. Memorize them in the order they come up in the solve: that way, every time you reach the step you are studying, you have already done everything before it without looking.

    1. Pick just one algorithm, the first one you still need to look up.
    2. Do it slowly ten or twenty times in a row, saying the turns out loud.
    3. Scramble and solve the whole cube, using the cheat sheet only for the steps you don't know yet.
    4. Once you have gone a whole day without looking it up, move on to the next one.
    Lesson 5: with the yellow line going from left to right, F R U R' U' F' makes the yellow cross. It is one of the first ones worth memorizing.

    How long it takes: it's a matter of repetition, and each new algorithm sticks faster than the one before because many share chunks, like R U R' U'. The sign that you have finished this level is simple: you solve it without the cheat sheet three times in a row.

    If an algorithm doesn't work and you don't know why, first check how you are holding the cube. Most mistakes at this stage come from starting with the wrong face in front, not from the turns.

    I solve it from memory in more than 2 minutes

    You have mastered the layer-by-layer method. To cut your time, the intermediate method changes two things: the cross is done directly, without the daisy, and the last layer is solved in four stages, two to orient it and two to permute it, with 16 algorithms (10 for OLL and 6 for PLL). You will already know many of them from the course.

    1. Direct cross: each white edge goes down to its place without going through the daisy.
    2. White corners in three turns, depending on where the white sticker faces.
    3. 2-look OLL: first the yellow cross, then the seven corner orientations.
    4. 2-look PLL: first the corners with the T perm or Y perm, then the edges.
    T perm with the headlights on the left: it swaps the two corners on the right. It is one of the 16 algorithms of the intermediate method.

    How long it takes: the direct cross takes a few days to feel natural; the 16 algorithms take longer. The practical approach is to learn the PLL ones first, since there are fewer, and add the OLL ones little by little, keeping the cheat sheet at hand in the meantime. Measure your average of five or twelve with the timer to see whether you are really getting faster.

    A cube that locks up costs you more seconds than any algorithm. If yours gets stuck or pops pieces, see how to fix it and how to give it proper maintenance.

    I solve it in under 1 minute

    It's time for CFOP, the method most speedcubers use. The big new thing is F2L: instead of placing the white corners first and then the second layer, you pair each corner with its edge and insert them together. You learn it intuitively, by understanding how the pair is formed, before moving on to algorithms.

    Pair already formed on the right face, with the white of the corner facing you: U R U' R' inserts it into its slot.

    An order that works:

    1. Do the cross on the bottom face and plan all of it before you start turning.
    2. Practice intuitive F2L until you no longer need the second layer of the layer-by-layer method.
    3. Complete PLL: 21 cases. Since there are fewer and they are easy to recognize, they pay off sooner.
    4. Complete OLL: 57 cases. Swap your two-step stages for the single algorithms one at a time.
    5. Work on look-ahead: looking for the next pair while you solve the current one.

    If you prefer fewer moves and fewer algorithms, Roux is the alternative: it works with blocks and finishes with turns of the middle layer. Both options are good; what you shouldn't do is switch from one to the other every week.

    How long it takes: this is the longest stage, and it's normal for intuitive F2L to make you slower for the first few weeks. Full OLL and PLL are usually added over months, with no rush, while you keep practicing.

    Do slow solves on purpose, without ever stopping between steps. Moving slowly but without pauses teaches more look-ahead than going fast in fits and starts.

    I want to compete

    Official competitions are organized by the World Cube Association (WCA) and don't require you to be fast. You can find them on its website; for many you register right there and for others through the organizer. When the results of your first competition are published you get your WCA ID, the identifier that brings together all your official times.

    • Average of five: in most events you do five attempts, the best and the worst are dropped and the remaining three are averaged.
    • Inspection: you have 15 seconds to look at the cube before you start, without turning it. The judge calls out at 8 and 12 seconds. If you start between 15 and 17 seconds you get 2 seconds added, and from 17 on the attempt is a DNF.
    • Time limits: each competition sets a maximum time per attempt and sometimes a cutoff to get past the first attempts. Check them on the competition page before signing up.
    • Your cube: a delegate checks it. Magnets are allowed; Bluetooth cubes are not. Bring a spare.
    • Helping out: between rounds, competitors scramble cubes, judge or run the cubes to the tables. They will explain it to you there.

    How long it takes to prepare: not long. The most useful thing is to train under the same conditions: official scrambles, 15-second inspection and averages of five. The portal's timer does all three.

    At your first competition, a realistic goal is to finish all five attempts without penalties. It's common to be a bit slower than at home because of nerves.

    Which cube do I need?

    Any 3x3 with the usual color scheme works for learning: white opposite yellow, green opposite blue and red opposite orange. Even so, there is a clear difference between a toy cube and a speedcube: the second turns more smoothly, locks up less and tolerates turns that are not perfectly aligned. That last part is called corner cutting.

    • Magnets: they help each layer line up at the end of the turn. For learning, medium or light strength is best; magnets that are too strong tire your hand.
    • Tension: almost all speedcubes let you adjust it with screws or a tool-free system. Not too tight, which makes it hard to turn, and not too loose, which makes it hard to control. Adjust it a little at a time and equally on all six faces.
    • Stickers or stickerless: stickerless cubes don't peel or lose their color. Both are fine for competing.
    • Price: you don't need the most expensive model. A budget magnetic speedcube, like the entry-level models from any well-known speedcubing brand, is enough to take you a long way.

    If you already have a toy cube, start with it. Replace it when you notice it often locks up or pops pieces: that's where a speedcube makes the difference.

    Frequently asked questions

    What is the first thing I need to learn about the Rubik's Cube?

    Notation: knowing what R, U, F and the prime (') mean. With that you can follow the beginner's course, which starts with the daisy and the white cross without any algorithm to memorize.

    How long does it take to learn to solve the cube?

    It depends on how much you practice. The first lessons of the layer-by-layer method usually click on the first day; what takes longest is memorizing the seven algorithms. The important thing is not to skip ahead until the current lesson works without looking.

    How many algorithms do I need to know?

    Seven for the course's layer-by-layer method, 16 for the last layer of the intermediate method and 78 in total for the last layer of full CFOP (57 OLL and 21 PLL), plus F2L, which you learn intuitively.

    When should I move on to CFOP?

    When you can solve it from memory with the intermediate method and know its 16 algorithms without the cheat sheet. From there, F2L is what saves you the most time.

    Do you need to be fast to go to a competition?

    No. Each competition sets a time limit per attempt, and sometimes a cutoff to stay in the round, but there is no minimum level or age to sign up. You just need to know the basic rules: average of five, 15-second inspection and the penalties.

    Do I need a speedcube to start?

    No. Any 3x3 with the usual color scheme works for learning. A magnetic speedcube turns better and locks up less, and you notice it most when you are trying to get faster.

    You can already practise in the simulator

    Turn the layers with your finger, scramble the cube and try any algorithm step by step.

    Open the simulator

    Keep learning

    We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.

    See cubes in the shop →