Lesson 5: the yellow cross
The last layer begins. The first goal is a yellow cross on the top face, without worrying yet about the corners or the side colors. There are three possible patterns and a single algorithm, F R U R' U' F', which you repeat once, twice or three times.
F R U R' U' F'
On this page
In short
- Look only at the edges of the yellow face: the center and the four squares around it in a cross shape. The corners don't count.
- You will see one of three patterns: a dot (only the center), an L (the center and two edges forming an angle) or a straight line.
- With the line horizontal, F R U R' U' F' makes the cross. With the L pointing back and to the left, you need it twice.
- With the dot, the algorithm makes an L. Turn the top layer to put it at the back left and go on as with the L.
- If you see one or three yellow edges facing up, the cube was put together wrong and can't be solved with algorithms.
What the yellow cross is and what to look at
With the first two layers done, hold the cube with yellow on top, as in the rest of the course. The top pieces have yellow, but each one can have it facing up or facing sideways. This lesson is about getting all four top edges to have yellow facing the ceiling, forming a cross with the center.
The corners can be in any state, and the side colors of the edges don't matter yet either. That is why in the cubes of this lesson only the two bottom layers and the yellow stickers of the top edges are shown in color.
Everything is done with F R U R' U' F': one F move, the R U R' U' motion you already know from lesson 3, and F' to close. It changes the orientation of some top edges and leaves the two bottom layers exactly as they were.
The three patterns you can find
| Pattern on the top face | How to hold it | Times to do the algorithm |
|---|---|---|
| Line: the center and two opposite edges | Horizontal, from left to right | 1 |
| L: the center and two edges forming an angle | With the arms pointing back and to the left | 2 |
| Dot: only the center | Any way; it then becomes an L | 3, with a U turn in between |
| Cross: the center and all four edges | Already done | 0 |
The L is often described with a clock face: with the cube held correctly, the two yellow edges are at nine and twelve o'clock. If your L points somewhere else, turn the top layer with U until it is like that.
The line: once
If there is a yellow line on top, turn the top layer so it runs from left to right, through the center. Do the algorithm once and the cross is formed.
If you do the algorithm with the line vertical, from front to back, the cross doesn't form: you go back to the dot. That's fine, just go on with the dot case, but you will have to do the algorithm three more times.
The L: twice
Place the L with its arms pointing back and to the left. The first time, the algorithm turns it into a horizontal line. The second time, into a cross. Written with repetition notation: (F R U R' U' F')2.
There is a variant of the same algorithm, F U R U' R' F', which the official Rubik's guide uses for this step. With it, the L pointing back and to the left becomes a cross in a single go, and the horizontal line needs two. Learn one of the two and don't mix them.
The dot: algorithm, U2 and twice more
If only the center is yellow, you don't need to look for any position: do the algorithm with the cube as it is. An L will appear, which in this example points to the front and right. U2 turns it to point back and to the left and, from there, the algorithm twice more makes the cross.
That is three times in total. What changes from cube to cube is whether you need to turn the top layer between the first time and the second: always check where the L points before going on.
What to do if it goes wrong, and common mistakes
- The L in the wrong position. If the L points back and to the right, or front and to the left, the algorithm leaves another L just like it. If it points front and to the right, you get a vertical line. In every case, turn U and go on with the pattern you have.
- Counting the corners. A corner with yellow facing up is not part of the cross. Look only at the four edges touching the center.
- Seeing the second layer broken. The algorithm doesn't touch it if done correctly. The most common slip is reversing the last two moves: check that you end with U' and F'.
- One or three yellow edges facing up. That is not a case of the method: on a correctly assembled cube, the number of edges with yellow facing up is always even. Someone has taken out an edge and put it back flipped. You have to flip it by hand.
If you don't know which repetition you are on, stop and look at the top face. The pattern tells you how many are left: line, one; L, two; dot, three.
A tip to memorize it
The algorithm is the lesson 3 motion placed between F and F': front, R U R' U', front reversed. If you already have R U R' U' in your hands, you only need to add one move at the start and undo it at the end.
You don't need to scramble the whole cube to practice. With the first two layers done, repeat the algorithm with the top layer in different positions and all the patterns will show up. When you can recognize each one at a glance and know how to hold it, move on to lesson 6.
Frequently asked questions
Do the corners matter for the yellow cross?
No. The top corners are oriented in lesson 6. For now only the four edges around the yellow center count.
Why does the L have to point back and to the left?
Because from that position F R U R' U' F' turns it into a horizontal line, and the horizontal line becomes a cross with one more go. With the L in another position the algorithm doesn't move you closer to the cross.
What do I do if I have one or three yellow edges on top?
That pattern can't come up on a correctly assembled cube. An edge was put in flipped when the cube was taken apart or when a piece popped out. Take it out carefully, flip it and put it back.
Does this algorithm scramble the first two layers?
No, if you do it correctly. F R U R' U' F' only changes pieces in the top layer. If the second layer is broken at the end, a move went the wrong way.
Do the side colors of the edges have to match?
Not yet. The edges are put in their final spot in lesson 8, the last one of the course.
Beginner's course
You can already practise in the simulator
Turn the layers with your finger, scramble the cube and try any algorithm step by step.
Keep learning
- Where do I start? Tell us what your cube looks like and we'll take you to the right lesson.
- Notation: what each letter means R, U, F, the prime and the 2, shown turning in 3D.
- Intermediate method (2-look OLL and PLL) The bridge between the beginner's method and CFOP.
- CFOP method Cross, F2L, OLL and PLL: the method used by almost every speedcuber.
- Roux method Blocks and the middle slice: fewer moves, a different way of thinking.
- Solving blindfolded The 3x3 without looking, with the Old Pochmann method.
- Solving one-handed How to hold the cube and which algorithms change.
- Fewest moves (FMC) Solving the 3x3 in as few moves as possible.
- Solving the 2x2 The pocket cube, in three steps.
- Solving the Pyraminx The pyramid, with its tips and centres in 3D.
- Solving the 4x4 The Revenge cube, by reduction.
- Solving the 5x5 The Professor's Cube, with the same method as the 4x4.
- Solving the Skewb The cube that turns around its corners, with two algorithms.
- Solving the Megaminx The 12-sided dodecahedron, layer by layer.
We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.
See cubes in the shop →