Rubik's Cube
Esc

    How to Solve the Rubik's Clock Step by Step

    The Rubik's Clock looks nothing like a cube: it is a disc with nine clocks on each side, four pins and four wheels. You solve it without memorizing algorithms, in three steps: a cross on the first side, another on the second, and the corners. Here you will find how the mechanism works, the official notation and a complete solve, with every amount, on a 3D clock.

    20 min read11 animated cubes

    UR3+ DL3+ y2 UR3+ DL3+

    On this page
    1. 1. What it is
    2. 2. Mechanism
    3. 3. Notation
    4. 4. The method
    5. 5. First cross
    6. 6. Second cross
    7. 7. Corners
    8. 8. Mistakes
    9. 9. Faster
    10. 10. Care
    11. Frequently asked questions

    In short

    • The Clock has 18 dials, 9 per side, but the 4 corners are the same piece seen from both sides: there are only 14 independent dials and 12 to the power of 14 positions.
    • A pin that is up links the four dials around it. When you turn a wheel next to a pin that is up, every linked dial on that side moves.
    • Step 1: on the first side, each edge is matched to the center by pushing up the two pins on the opposite side, and the cross is brought to 12 with all four pins up.
    • Step 2: you flip the clock over and build the same cross on the other side. The first cross does not move, because its pins are now down.
    • Step 3: each corner is joined to the cross by pushing up the other three pins and, at the end, everything is brought to 12. That makes 14 wheel turns at most.

    What the Rubik's Clock is and what parts it has

    The Rubik's Clock is a mechanical puzzle shaped like a disc with two sides. Each side has nine small clocks, which this guide calls dials, laid out in a 3x3 grid. Each dial has a single hand and twelve positions, one per hour. The puzzle is solved when all 18 dials point to 12.

    It was invented by Christopher C. Wiggs and Christopher J. Taylor, who patented it in the late eighties in Europe, Japan, the United Kingdom and the United States, where the patent was granted in September 1989. Ernő Rubik bought the patent from them to sell it under his name, and it went on sale in 1988.

    It has three kinds of visible parts:

    • 18 dials, 9 on each side: a center, four edges (top, bottom, left and right) and four corners.
    • 4 pins, the buttons between the dials. They go right through the disc: if a pin sticks out on one side, it is pushed in on the other.
    • 4 wheels on the rim of the disc, one next to each corner. They are the only thing you turn.

    The corners are shared

    Each wheel is linked to the corner next to it, and that corner is the same piece at the front and at the back. When you turn a wheel, its corner moves on both sides at once, although seen from the back it turns the other way: if it points to 3 at the front, it points to 9 at the back. That is why a corner that is at 12 on one side is also at 12 on the other.

    Of the 18 dials, only 14 move on their own: the center and the four edges of each side, plus the four corners. With 12 hours for each one, you get 12 to the power of 14, that is, 1,283,918,464,548,864 positions. If you also count the 16 possible pin settings, the figure is multiplied by 16. Computer searches have shown that any position can be solved in 12 moves or fewer, counting each wheel turn with a given pin setting as one move.

    The Clock in competition

    It has been an official WCA event since the first regulations in 2004; the WCA is the association that runs speedcubing competitions. It is held as an average of five attempts, with 15 seconds of inspection before each one. The current scramble notation has been in the regulations since 2013. Since January 1, 2024, official scrambles no longer say how the pins should be left at the end, and you are allowed to move the pins during inspection.

    In June 2026 the WCA announced that the Clock will stop being an official event and that its place on the list will go to the FTO, an octahedron that turns around its faces. The Clock will still be held until the 2027 World Championship, which will be the last official competition with this event. For learning and practicing, nothing changes. If you want to see how it fits among the other puzzles, see the guide to types of cubes.

    How the pins and wheels work

    The whole Clock depends on the pins. When a pin sticks out on the side facing you, it is up. When it is pushed in, it is down, and then it sticks out on the back. A pin can never be up on both sides at the same time.

    A pin that is up links the four dials around it to the wheel at its corner. The top right pin, for example, links the top right corner, the top edge, the right edge and the center. If several pins are up, their groups merge into one, because they all share the center. This gives four rules:

    • When you turn a wheel next to a pin that is up, every linked dial on the front moves, by the same number of hours and in the same direction.
    • The wheels of the other pins that are up turn with them, and so do their corners. On the back, those corners change and nothing else: the back center and edges stay still.
    • When you turn a wheel next to a pin that is down, the same thing happens on the back, because from that side the pin is up.
    • With all four pins up, any wheel moves the whole front. With all four down, any wheel moves the whole back.
    Pins up on the frontDials on that side that move
    One, for example the top right one4: its corner, its two edges and the center
    Both on the same side, for example the two at the top6: the top row and the middle row
    Two on a diagonal7: the center, the four edges and those two corners
    Three8: all except the corner of the pin that is down
    All four9: the whole side

    This table is the whole method. At each step you choose which dials you want to move together and which one you want to keep still as a reference, and you push up the pins that do that.

    What confuses people most at first: the back never stays completely still when you turn a front wheel, because the corners are shared. What does stay safe at the back is the cross, that is, the center and the four edges, and the method is built on that.

    Rubik's Clock notation

    Official scrambles and the solutions in this guide use WCA notation. You hold the clock with 12 at the top and either side facing you. Each move says two things: which pins you push up and how many hours you turn.

    • UR, DR, DL, UL: only that pin up. U means up, D down, R right and L left. UR is the top right pin and DL the bottom left one.
    • U, R, D, L: the two pins on that side up. U is the two at the top and R the two on the right.
    • ALL: all four pins up.

    Pins that are not named are down. After them comes a number from 1 to 6 and a sign: 3+ means three hours clockwise and 2- two hours counterclockwise, always looking at the front. You turn a wheel next to a pin that is up; it does not matter which one, because all the wheels in that group are linked. Finally, y2 means flipping the clock over sideways, like the page of a book, so that 12 stays at the top.

    In the viewer on this page, the side that starts at the front is the blue one, with white dials, and the back is the light one, with black dials. Each dial has a red mark at 12. The pins are the gold cylinders: a pin that is up sticks out towards the front.

    UR3+: only the top right pin is up. Its corner, the top and right edges and the center move forward three hours, to 3. At the back only that corner changes; seen from the back it is at the top left and points to 9.

    UR3+one pin

    U2-: the two top pins go up and the six dials in the top two rows go back two hours, to 10. At the back the two top corners change and point to 2.

    U2-two pins

    ALL1+: the whole front moves to 1. At the back the four corners move and point to 11, while the center and edges stay at 12.

    ALL1+all four pins

    UR3+ y2: after the UR3+ the clock is flipped over. Now the light side is at the front, where only one corner had changed: it shows at the top left and points to 9.

    y2flipping the clock over

    What an official scramble looks like

    Competition scrambles always have the same shape: nine moves with one side at the front (UR DR DL UL U R D L ALL, each with its number), a y2 and five more on the other side (U R D L ALL). Sometimes 0+ appears, which turns nothing. Scrambles from before 2024 also ended with pins without a number, such as UR DL: they turn nothing and only say which pins to leave up at the end. If you want to compare it with the notation of other puzzles, see the notation guide.

    The beginner method in three steps

    The most widely taught method for beginners is built on the cross: the center and the four edges of one side. You do it first on one side, then on the other, and leave the corners for the end. There is nothing to memorize: at each step you move a group of dials until it shows the same hour as another dial that you keep still.

    StepWhat you getPins up
    1. First crossThe center and the four edges of the first side, at 12The two on the side opposite each edge; at the end, all four
    2. Second crossThe center and the four edges of the other side at the same hour, without touching the first crossSame as in step 1
    3. CornersThe four corners at the hour of the cross and then everything at 12The three that are not the corner's pin; at the end, all four

    Why the corners come last

    Because they are shared. Every turn moves some corner, so if you left them perfect on the first side, they would move again while you build the cross on the second. The center and edges of a side, on the other hand, only move with pins up on that side: while you work on the second side, the first cross stays safe. And since each corner is a single piece, when you solve the corners on the second side, the ones on the first side end up solved too.

    The method uses 14 wheel turns at most: five on the first side, four for the second cross, four for the corners and one to bring everything to 12. If a dial already shows the hour you need, you skip that turn.

    The example scramble

    The following steps solve this scramble, which has the shape of an official one: UR2+ DR5- DL3+ UL1- U4+ R6+ D2- L5+ ALL3- y2 U1+ R4- D3+ L2- ALL6+. Once the scramble is done, the light side is at the front, and that is where the solution starts.

    The example scramble. It ends with the light side at the front: the top row shows 8, 1 and 10; the middle row 8, 4 and 6; the bottom row 11, 3 and 2.

    Step 1: the cross on the first side

    Hold the clock with 12 at the top. You are going to match the edges to the center one at a time. Since the center moves with any pin, you do not bring the edge to the center but the center to the edge, taking care that the edge does not move.

    To join an edge to the center, push up the two pins on the side opposite that edge and turn until the center shows the same hour as the edge. For the top edge, the two bottom pins (D); for the right edge, the two on the left (L); for the bottom edge, the two at the top (U), and for the left edge, the two on the right (R).

    The two pins on the opposite side move six dials: all except the row or column of the edge you want to reach. The edges you have already joined to the center are always among those six, so they travel with it and never come apart.

    1. Top edge: push up the two bottom pins and turn until the center shows the hour of the top edge.
    2. Right edge: push up the two on the left and turn until the center, and the top edge with it, shows the hour of the right edge.
    3. Bottom edge: push up the two at the top and turn until the group shows the hour of the bottom edge.
    4. Left edge: push up the two on the right and turn until the group shows the hour of the left edge. You now have the cross: the center and the four edges at the same hour.
    5. Push up all four pins and turn until the cross points to 12. The corners on this side do not matter yet.

    Always turn the short way. If the difference is more than six hours, go backwards: you will never need more than six hours in one turn.

    The example: the cross on the light side

    After the scramble, the light side has its center at 4 and its edges at 1 (top), 6 (right), 3 (bottom) and 8 (left). The edges you have not joined yet move with the center, so at each step you have to look at the hour they show at that moment:

    • D3-: with the two bottom pins, the center goes back from 4 to 1, the hour of the top edge. The right edge has moved with it and now points to 3.
    • L2+: with the two on the left, the center and the top edge go from 1 to 3, the hour of the right edge. The bottom edge now points to 2.
    • U1-: with the two at the top, the center and the top and right edges go back from 3 to 2, the hour of the bottom edge. The left edge now points to 6.
    • R4+: with the two on the right, the four linked dials move forward from 2 to 6, the hour of the left edge. The cross is done, at 6.
    The four turns of the first cross. At the end, the center and the four edges of the light side point to 6.

    All that is left is to bring the cross to 12. With ALL6+, all four pins up and six hours forward, the cross goes from 6 to 12. The corners end up at 3, 7, 4 and 9, and that is fine: they are fixed in step 3.

    ALL6+: the cross on the light side reaches 12. The corners are still unsolved.

    Step 2: the cross on the second side

    Flip the clock over (y2) with 12 at the top and do the same on this side, with the same rule: for each edge, the two pins on the opposite side, and you turn until the center shows its hour.

    The first cross is not disturbed because the pins you push up on this side are down on the other, and the center and edges of the other side only move with their own pins up. Over there, only the corners change, and they do not matter yet.

    On this side you do not need to bring the cross to 12, because it moves again in step 3. It is enough for the center and the four edges to show the same hour.

    The example: the cross on the blue side

    After the y2 the blue side is at the front, with the center at 9 and the top edge at 1:

    • D4+: the center moves forward from 9 to 1, the hour of the top edge. The right edge, which moves with it, goes from 2 to 6.
    • L5+: the center and the top edge move forward from 1 to 6, the hour of the right edge. The bottom edge now points to 1.
    • U5-: the group goes back from 6 to 1, the hour of the bottom edge. The left edge now points to 10.
    • R3-: the four linked dials go back from 1 to 10, the hour of the left edge. The cross on the blue side ends up at 10.
    The flip and the four turns of the second cross. The cross on the blue side ends up at 10, and the one on the light side, at the back, is still at 12.

    Step 3: the corners and the finish

    The four corners are left, and you solve them on the side facing you, the one with the second cross. Now you do the opposite of the cross: instead of moving the corner, you move everything else to its hour.

    To join a corner, leave its pin down, push up the other three and turn a wheel next to a pin that is up until the center shows the same hour as that corner. With three pins up, eight dials move, all except that corner, so the cross and the corners you have already joined travel together.

    Repeat with the other three corners, in any order you like. When all nine dials on this side show the same hour, push up all four pins and turn to 12. Since the corners are shared and the other cross was already at 12, the clock is solved on both sides.

    Watch which wheel you use: the one at the corner whose pin is down does not move this side but the other one, and it would ruin the first cross. Turn one of the other three.

    Three pins in notation

    WCA notation has no name for three pins up, because scrambles do not use it, and the viewer on this page only understands that notation. So in the example, each turn with three pins is shown as three moves that leave the clock in exactly the same state. On your clock you make a single turn of n hours with the three pins up.

    Corner you want to joinPin downThe same in WCA notation
    Top rightURDn+ Ln+ DLn-
    Bottom rightDRUn+ Ln+ ULn-
    Bottom leftDLUn+ Rn+ URn-
    Top leftULDn+ Rn+ DRn-

    If the turn goes backwards, all three signs are swapped. The first two moves turn six dials each, and the four around the pin of the opposite corner move twice; the third move takes away that extra turn.

    The example: the corners on the blue side

    With the cross on the blue side at 10, the corners show 1 (top right), 9 (bottom right), 12 (bottom left) and 5 (top left). Since the corners you have not joined yet move with the group, check each one just before joining it:

    • Top right, at 1: UR pin down and the other three up. Three hours forward take the center from 10 to 1. The bottom right corner moves forward with the group and reaches 12.
    • Bottom right, at 12: DR pin down. One hour back takes the group from 1 to 12. The bottom left corner now points to 2.
    • Bottom left, at 2: DL pin down. Two hours forward take the group from 12 to 2. The top left corner now points to 9.
    • Top left, at 9: UL pin down. Five hours back take the group from 2 to 9. All nine dials on the blue side point to 9.
    • ALL3+: with all four pins up, three more hours and everything is at 12, on both sides.
    The top right corner. On your clock it is a single three-hour turn with the other three pins up; the viewer shows it as its three equivalent moves. The center goes from 10 to 1.
    The other three corners, each with its three moves: one hour back, two forward and five back. The whole blue side ends up at 9.
    ALL3+: the nine dials go from 9 to 12 and the clock is solved on both sides.

    On your clock, the full solution is 14 turns: five on the light side, the flip, four on the blue side, four corners and the final turn.

    Common mistakes and how to avoid them

    • Turning with a pin halfway. If a pin is not fully up or down, the wheel feels stiff or moves a different group from the one you expected. Before each turn, check all four.
    • Forgetting the pins from the previous turn. Each turn starts by setting all four: the ones you need up and the rest down. A pin left up from the previous turn changes the group that moves.
    • Turning the wrong wheel. Only the wheels next to a pin that is up move the front. The wheel of a pin that is down moves the back. It is the most common slip in step 3.
    • Pushing up the pins on the edge's side. In the cross, the two pins touching the edge move it together with the center, and the difference between the two never changes. You need the ones on the opposite side.
    • Panicking because the first side changes. During step 2 its corners move, and that is expected. What must not move is its cross; if it has moved, you turned a wheel next to a pin that is down.
    • Reading the corners from the other side. A corner that points to 3 on one side points to 9 on the other. Always compare hours on the side you are working on.
    • Working out the hour of a dial that has moved. The dials you have not joined yet move with the group. Check the hour just before each turn, not the one it had at the start.

    If you get lost, there is no need to start again. As long as the cross on the first side is still at 12, you can repeat from step 2 with the clock as it is.

    Beyond the easy method: flip and 7-simul

    The method in this guide already has the core idea of the competition methods: one dial per turn and 14 turns at most, one for each independent dial. What changes in the fast methods is the order, how the turns are worked out and how many hands turn at once.

    • Flip. This is the traditional competition method. It solves one dial per turn, with 14 turns at most, and the clock is flipped over halfway through the solve to see the other side. Each turn is made with one hand and decided by looking at how the previous one left things, so there is little planning ahead.
    • 7-simul. It appeared at the end of 2022. It takes advantage of the fact that, with the same pins, the wheels next to pins that are up move the front and the wheels next to pins that are down move the back. Two wheels are turned at once, one with each hand, and each move solves one dial on each side: seven double moves, without flipping the clock. In return, the amounts for the back are worked out and memorized during inspection, because you cannot see them while turning, and some scrambles have awkward turns made with the little finger.
    • 7-simul flip. A 2023 variant that keeps the seven double moves, drops the little-finger turns and, in return, flips the clock over after the first three moves.

    Before making the jump, it is worth doing the method in this guide without looking at the instructions and timing yourself with the timer, which uses the same 15-second inspection as a competition.

    Competition times

    The best in the world solve the Clock in under 2 seconds in a single attempt, and the best averages of five are around 2 seconds. Records change often; the current ones are on the records page. Outside the WCA, a robot built by Erez Borenshtein solved it in 0.443 seconds in November 2024, a time recognized by Guinness.

    If you like solving puzzles without colors or long algorithms, the Skewb and the Pyraminx are the next easiest, and any terms you do not know are in the glossary.

    Care and pin problems

    Almost every problem with the Clock comes from the pins. A pin that is not where it should be changes what each turn moves, and that looks like a method mistake even when it is not.

    • Loose pins. With use, some pins go up or down by themselves when you move the clock. The WCA does not allow a Clock in competition whose pins change position under their own weight. Many current speed clocks have magnets in the pins so that they stay firmly in each position.
    • Loose caps. On some models the end of the pin is a separate part that can come off. In competition it does not count when deciding whether the clock is solved. Keep it and put it back by pressing gently, without forcing it.
    • Stiff wheels. If a wheel will not turn, there is almost always a pin halfway. Set it fully up or down before trying again; forcing the wheel wears out the mechanism.
    • Hands between two hours. Speed clocks have magnets in the dials so that each hand stops exactly on an hour. On those without them, check at the end of each turn that the hand points to an exact hour.
    • Knocks. The pins stick out on both sides and are the first thing to get knocked. Keep the clock in its box or in a case, and clean the outside with a dry cloth.

    For general care of your puzzles, see the maintenance guide, and if you are thinking of buying one, the guide on which cube to buy.

    Frequently asked questions

    Do you need to memorize algorithms to solve the Rubik's Clock?

    No. With the method in this guide there are only two rules: for the cross you push up the two pins on the side opposite the edge, and for the corners, the three that are not the corner's pin. At each step you turn until the center shows the hour of the dial you are after.

    How many positions does the Rubik's Clock have?

    1,283,918,464,548,864, which is 12 to the power of 14: there are 14 independent dials, because the four corners are the same piece at the front and at the back, and each one has 12 hours. If you also count the 16 possible pin settings, the figure is multiplied by 16.

    What is the maximum number of moves needed?

    Computer searches have shown that any position can be solved in 12 moves or fewer. The method in this guide uses 14 at most, one for each independent dial.

    Why does the first side get messed up when I work on the second?

    If what changes are the corners, that is normal: they are shared and get fixed in step 3. If the cross on the first side gets messed up, you turned a wheel next to a pin that is down on the side facing you, because that pin is up on the other side.

    What do the loose pins at the end of some scrambles, such as UR DL, mean?

    They appeared in official scrambles before 2024. They turn nothing: they only say which pins to leave up once the scramble is done. Since January 1, 2024, scrambles no longer include them.

    Is the Rubik's Clock still an official event?

    Yes, for now. In June 2026 the WCA announced that it will stop being one and that the 2027 World Championship will be the last competition with this event. Until then it is still held under the current rules.

    Who invented the Rubik's Clock?

    Christopher C. Wiggs and Christopher J. Taylor, who patented it. Ernő Rubik bought the patent from them to sell it under his name, and it went on sale in 1988.

    You can already practise in the simulator

    Turn the layers with your finger, scramble the cube and try any algorithm step by step.

    Open the simulator

    Keep learning

    We sell the cubes these guides were made with: GAN, MoYu and QiYi, from a first cube to competition models, plus lubricants.

    Shop unusual cubes →