Pyraminx Solver
Paint your Pyraminx holding it any way you like or type the scramble, and follow the shortest solution on a 3D Pyraminx.
Hold the cube with the yellow center on top and green in front. Pick a color and paint the squares; you can drag.
How to get the most out of it
To learn, not to set records
The solution uses the beginner course method, so it is long (about 140 moves) but every step makes sense and links to its lesson. A computer can solve any scramble in 20 moves or fewer, but you cannot learn that solution.
How to paint it right
Look at each face straight on, in this order: top (yellow) with green at the bottom, then the side faces and finally the bottom. If you make a mistake, the solver tells you if a color is missing or extra, or if a piece is impossible.
Follow it in 3D
The 3D cube starts from your scramble. Play it, stop wherever you want and jump to any step. If a step is hard, open its lesson.
How to use it
To solve the Pyraminx online, all you have to do is copy its state into the net, or give the solver the scramble you used to mix it up. There are three ways:
- Paint the 36 triangles of the flat net: nine on each of the four faces.
- Type a scramble with the layers U, L, R and B and the tips u, l, r and b.
- Generate a random scramble to practise with.
The result is an optimal solution for the layers, followed by any tip turns still needed, and a 3D Pyraminx that plays it from your position.
How to paint the Pyraminx in the net
The net is the Pyraminx unfolded: the front face in the middle and, around it, the left, right and bottom faces, each one attached to the edge it shares with the front face. You can hold the Pyraminx however you like: the solver works out by itself how it is oriented. The only thing you need to do is keep the same position while you paint.
- Put the Pyraminx on the table, resting on one face, with another face looking at you. That is the front face: paint it in the middle triangle of the net.
- Turn it slightly so that you see the left face straight on and paint its nine triangles in the triangle of the net that touches the left edge of the front face. Do the same with the right face.
- Lift it up and look at the base, the face that was resting on the table. Paint it in the triangle that touches the bottom edge of the front face.
- Before solving, compare a whole edge: its two colours must be on two triangles that touch in the net, one on each side of the fold.
Keep in mind how the pieces work. The tips, the small triangles at each vertex, and the centres underneath them never change place, they only rotate. That is why each tip carries the same three colours as its centre. If you paint a tip with a colour that its centre does not have, one of the two is wrong.
When painting the base it is easy to copy it rotated. Tilt the Pyraminx towards you until you see the base straight on, with the edge it shares with the front face at the top: that way it sits exactly as in the net.
How to type a Pyraminx scramble
The official notation names each vertex with a letter. With yellow at the bottom and green in front, U is the top vertex, L the front-left one, R the front-right one and B the back one. This is the position in which competition scrambles are applied.
- A capital letter turns the whole layer of that vertex: the tip, the centre and the three edges around it. It is a third of a turn clockwise, looking straight at the vertex.
- With a prime, as in R', it is the same turn the other way.
- A lower-case letter (u, l, r, b) turns only the tip.
- There are no half turns: two thirds one way are the same as one third the other way, so you will never see a 2.
Official scrambles put the layer turns first and the tip turns at the end, for example U' L R' B L' U R B' l r' b. Type it exactly as it is, with spaces between the turns. The notation guide has more detail on how to read the letters.
How to read the solution: layers and tips
The solution comes in two parts. First, the layer turns: this is the shortest possible sequence to put the edges and centres in place. No Pyraminx position needs more than 11 layer turns for that, not counting the tips. Then come up to four tip turns, no more than one per vertex, to line each tip up with its centre.
The tips are counted separately because they are independent: they do not touch any other piece, and each one can only be correct or turned a third one way or the other. That is why every method, this one included, leaves them for the beginning or the end. Without the tips the Pyraminx has 933,120 positions; with them, about 75.6 million.
To follow the solution, hold the Pyraminx as you held it while painting and compare it with the 3D one before you start. Make each turn at the same time as the animation and pause if you lose track: with eleven turns at most, painting it again is quicker than trying to undo the turns.
If it says your Pyraminx cannot be solved
There are positions a Pyraminx cannot reach by turning its layers. The two that come up when painting are these:
- A single flipped edge. Flipped edges always come in pairs. If there is only one, you have almost certainly painted its two colours the wrong way round.
- Two edges swapped and nothing else. This cannot come about by turning either. Check that the colours of those two edges are where you see them on your Pyraminx.
Before you get that far, count the colours: each one has to appear nine times. And make sure no edge has two identical colours, because each of the six real edges has a different pair of colours.
If the net is painted correctly and there is still no solution, the Pyraminx was put back together wrongly after being taken apart or after a piece popped out. The edges are the only pieces that come out easily: take the edge out and put it back with the colours on the correct side.
Learning to solve it yourself
The optimal solution does not follow a method you can memorise. If you want to solve the Pyraminx without help, the layer-by-layer method has four steps: the tips, the centres, the first layer and the last layer, with four short sequences. We explain it with a 3D Pyraminx for each case in the guide to solving the Pyraminx.
Once you can do it, the solver is useful for comparing: scramble it, solve it with your method and see how many turns would have been enough. It is one of the official puzzles that can be solved fastest, and with the timer you can record your times.
Frequently asked questions
What is the maximum number of moves needed to solve a Pyraminx?
Eleven layer turns, not counting the tips. The tips add at most four more turns, one per vertex. The solver always gives the shortest possible layer sequence.
How do I have to hold the Pyraminx to paint it?
However you like. The solver detects the orientation from the colours. You only have to paint the front face in the middle of the net and the other three around it, without changing position while you paint.
What do the lower-case letters in a Pyraminx scramble mean?
They are tip turns: u, l, r and b move only the small triangle at that vertex. The capitals U, L, R and B turn the whole layer of the vertex.
Why is there no R2 on the Pyraminx?
Because each layer turns a third of a turn. Two turns one way are the same as one turn the other way, so R2 is written R'.
Why does it say my Pyraminx has no solution?
The most common cause is an edge painted with its colours reversed, or two edges swapped. A single flipped edge cannot come about by turning the layers. If the net is correct, the piece was put back the wrong way round after popping out.
Is using a Pyraminx solver cheating?
Not for getting unstuck or for learning. No help of any kind is allowed in competition. If you want to do it yourself, the Pyraminx guide explains it in four steps.
Keep learning
- Solving the PyraminxThe pyramid, with its tips and centres in 3D.
- Beginner's courseEight short lessons to solve the cube for the first time.
- Notation: what each letter meansR, U, F, the prime and the 2, shown turning in 3D.
- Solving the 2x2The pocket cube, in three steps.
- Solving the SkewbThe cube that turns around its corners, with two algorithms.
- How to solve the Rubik's Clock18 dials and 4 pins, face by face with a worked example.