Rubik's Cube

    Hold the cube with the yellow center on top and green in front. Pick a color and paint the squares; you can drag.

    How to get the most out of it

    To learn, not to set records

    The solution uses the beginner course method, so it is long (about 140 moves) but every step makes sense and links to its lesson. A computer can solve any scramble in 20 moves or fewer, but you cannot learn that solution.

    How to paint it right

    Look at each face straight on, in this order: top (yellow) with green at the bottom, then the side faces and finally the bottom. If you make a mistake, the solver tells you if a color is missing or extra, or if a piece is impossible.

    Follow it in 3D

    The 3D cube starts from your scramble. Play it, stop wherever you want and jump to any step. If a step is hard, open its lesson.

    How to copy your clock into the tool

    The Rubik's Clock has nine dials on each side, 18 in total, and each one shows one of twelve hours. To solve it here you have to tell the tool what time each dial shows, or give it the scramble you used to mix it up.

    • By tapping the dials. Each tap moves that dial one hour forward. If you go too far, a right-click on a computer or a long press on a phone moves it back one hour.
    • By typing a scramble in the official WCA notation.
    • With a random scramble, to practise.

    The four corners work as they do on the real clock: each corner is the same piece seen from the front and from the back, so when you change a corner on one side, the one on the other side changes too. That is why you only need to set 14 independent dials: the centre and the four edges of each side, which make ten, plus the four corners.

    Step by step so you get every time right

    1. Hold the clock with 12 at the top and choose one side for the front. Copy its nine dials, tapping each one until it shows the same as yours.
    2. Turn the clock over sideways, like the page of a book, so that 12 stays at the top. This is how it is turned over in the official notation.
    3. Copy the back. Its corners will already be set, because they are the same pieces you set on the first side.
    4. Before solving, compare each corner on the back with your clock. If one does not match, you turned the clock over a different way or copied that corner wrongly on the front.

    Bear in mind that a corner reads the other way round from each side: if it shows 3 on the front, it shows 9 on the back. 12 and 6 are the only times that read the same on both sides. Do not try to work it out yourself: set the corner on the side you have in front of you and let the tool set the other one.

    The tool does not ask for the position of the pins, because they do not change the time on any dial. Each move of the solution already tells you which pins to push up before turning.

    How to type a Clock scramble

    An official scramble always has the same shape: nine moves with one side in front, a y2 to turn the clock over and five more moves on the other side. For example:

    UR3+ DR1- DL5+ UL2- U4+ R0+ D6+ L3- ALL2+ y2 U1- R5+ D2+ L4- ALL1+

    • The letters tell you which pins go up: UR, DR, DL and UL name a single pin (top right, bottom right, bottom left and top left); U, R, D and L, the two on that side; ALL, all four.
    • The number, from 0 to 6, is how many hours you turn a wheel next to a pin that is up.
    • The sign gives the direction, looking at the front: + clockwise and - anticlockwise. 0+ turns nothing.
    • y2 means turning the clock over sideways, with 12 at the top.

    Scrambles from before 2024 also ended with pins without a number, such as UR DL, which only showed how to leave the pins at the end. They do not move any dial, so you can leave them out when you copy the scramble.

    How to follow the solution on your clock

    The solution comes in the same WCA notation and has no more than 14 wheel turns. It is not always the shortest possible, since it has been calculated that any position can be solved in 12, but it is short and easy to follow. The 3D clock plays it from your position.

    For each move, always do the same thing, in this order:

    1. Set the four pins: up the ones the move names and down all the others. A pin left up from the previous move changes what moves.
    2. Turn a wheel next to one of the pins that are up, by the number of hours given and in the direction of the sign, looking at the front.
    3. When you reach y2, turn the clock over sideways, with 12 at the top, and carry on with the other side.

    If a pin is not fully up or fully down, the wheel feels stiff or moves a different group from the one you expect. Check the pins before each turn. If any dial is not at 12 at the end, copy the clock again as it is and ask for a new solution.

    If the solution does not leave the clock at 12

    Unlike the cubes, the Clock has no impossible positions: any combination of times on the 14 independent dials can be solved. There are 12 to the power of 14, about 1.28 quadrillion. If the solution does not work, the problem lies in the copy or in how it was followed:

    • One dial copied wrongly. One hour out on a single dial is enough for it not to come out right at the end.
    • The back copied rotated. If you turned the clock over top to bottom instead of sideways, that side is copied rotated by half a turn and the 12 ends up where the 6 should be.
    • The clock held with the other side in front. The solution starts with the side you copied first facing you.
    • A wheel next to a pin that is down. That wheel moves the other side, not the one in front of you.

    If the wheels or pins on your clock stick or slip, the Rubik's Clock guide has a section on looking after the mechanism.

    Solving it without help

    The Rubik's Clock can be solved without memorising a single algorithm. The beginner method has three steps: a cross on the first side, another cross on the second side, and the corners, and in total it also comes to 14 turns at most. We explain it with a 3D clock and a complete solve in the guide to solving the Rubik's Clock.

    Once you can do it on your own, you can use this tool to check a solve: copy the clock, solve it yourself and compare your turns with the tool's. To time your solves there is the timer.

    Frequently asked questions

    How do I solve the Rubik's Clock online?

    Copy the times on the 18 dials by tapping each one in the tool, or type the official scramble, and ask for the solution. It gives you at most 14 turns in WCA notation, with a 3D clock that plays them.

    Why does changing a corner also move the one on the other side?

    Because on the real clock each corner is a single piece that can be seen from both sides. If it shows 3 on the front, it shows 9 on the back. The tool reproduces this so you do not have to work it out.

    What is the maximum number of moves needed to solve the Clock?

    It has been calculated that any position can be solved in 12 wheel turns or fewer. The solutions from this tool and from the beginner method have 14 at most.

    What does y2 mean in a Clock scramble?

    Turning the clock over sideways, like the page of a book, so that 12 stays at the top. From then on the moves are made on the other side.

    Do I have to say how the pins are set?

    No. The pins do not change the time on any dial. Each move of the solution says which ones to push up; the ones it does not name go down.

    Is using a Rubik's Clock solver cheating?

    Not for learning or for checking a solve. No help of any kind is allowed in competition. If you want to do it yourself, the Rubik's Clock guide explains it in three steps without algorithms.

    Keep learning