Rubik's Cube

    Hold the cube with the yellow center on top and green in front. Pick a color and paint the squares; you can drag.

    How to get the most out of it

    To learn, not to set records

    The solution uses the beginner course method, so it is long (about 140 moves) but every step makes sense and links to its lesson. A computer can solve any scramble in 20 moves or fewer, but you cannot learn that solution.

    How to paint it right

    Look at each face straight on, in this order: top (yellow) with green at the bottom, then the side faces and finally the bottom. If you make a mistake, the solver tells you if a color is missing or extra, or if a piece is impossible.

    Follow it in 3D

    The 3D cube starts from your scramble. Play it, stop wherever you want and jump to any step. If a step is hard, open its lesson.

    How to use the Square-1 solver

    This Square-1 solver works from the scramble, not from the colours: because the puzzle changes shape, there is no template to paint and no camera scan here. You can give it your position in two ways:

    • Type the scramble in WCA notation, for example (1,0) / (-1,3) / (0,-3) / (4,-1) /, and press Apply and solve.
    • Press Random scramble. The tool picks a random position out of all possible ones, as competition scramble programs do, and writes the scramble that leads to it in the box. Apply it to your solved puzzle and press Solve.

    The solution uses the same notation, and a 3D Square-1 plays it from your position. You can pause it and step forward or back one move at a time. The total appears above it, for example "Solution in 25 moves, 12 of them slashes (/)". The first run takes a moment while the tool builds its tables.

    How to write a Square-1 scramble

    Think of each layer as a wheel with 12 slots of 30°: an edge takes one slot and a corner takes two. The notation has only two moves:

    • (x,y) turns the top layer x times 30° and the bottom layer y times 30°. A positive top number is clockwise as seen from above; a positive bottom number is clockwise as seen from below. Negative numbers go the other way and 0 leaves that layer still.
    • / is the slash: the right half makes a half turn, 180°. The left half never moves.

    Seen from the front, a positive number moves the top layer to the left and the bottom layer to the right, so (1,1) does not turn both layers the same way. Numbers go from -5 to 6, because 6 is a half turn in either direction; if you type a bigger one, the full turn is taken off and a 7 is read as -5. Spaces do not matter, but with letters, square brackets or other symbols the tool answers "I can't read that scramble". Cube notation, with R, U or F, is a different system and is explained in the notation guide.

    A slash is only possible when the cut line is clear on both layers, with no corner straddling it. If the scramble asks for a slash where a corner blocks the cut, the tool shows that same message instead of making up a turn.

    How to hold the Square-1 to follow the solution

    The scramble is applied to a solved Square-1, held the same way as for official scrambles, and the solution is followed without changing that grip:

    1. White layer on top and yellow on the bottom, with green in front and red on the right.
    2. The slash cut is on the right: from the front, it runs just to the left of the front edge, and the middle layer shows its small piece on the left.
    3. Do every slash with your right hand and hold the left half with the other. The direction of the half turn does not change the result.

    Do not turn the whole puzzle over halfway through the solution. If a slash will not go through, you turned a layer one edge too far or not far enough on the previous move: compare it with the 3D Square-1 and correct that turn.

    What kind of solution you get: short, but not the shortest

    The tool works in two parts, like the methods people use: first it brings the puzzle back to cube shape from any of the 170 shape combinations of the two layers, and then it places the pieces with turns that keep that shape. It also solves the order of corners and edges, parity (two edges swapped in a single layer) and the middle layer, which every slash switches between square and misshapen, and which the solution leaves square.

    Each (x,y) and each slash counts as one move. A typical solution has about 25 moves, around 12 of them slashes, and hardly ever goes over 33. It is not optimal: every position can be solved in 31 moves or fewer counted this way, and in at most 13 slashes. Finding the shortest every time would take much longer.

    If you get an error or the solution does not solve your puzzle

    If an error appears, the problem is in the text of the scramble. If you get a solution but your puzzle does not end up solved, the scramble was read correctly but does not match what you have in your hand. The usual causes:

    • An impossible slash. A miscopied number leaves a layer one edge off and the next slash runs into a corner.
    • A missing sign or comma. (1,-3) and (1,3) are different positions, and (13) with no comma cannot be read.
    • Another way of counting the bottom layer. Some guides count the bottom number as seen from above. There is no error, but the position is different.
    • Scrambling a puzzle that was not solved or had its middle layer out of shape.
    • A forgotten slash while scrambling or while following the solution.

    If you do not know which scramble mixed up your Square-1, the tool cannot read it. In that case, bring it back to cube shape with the method in the guide.

    From the solver to solving it yourself

    A computer solution does not follow a method, so it is more useful for getting unstuck than for learning. To learn, use the guide on how to solve the Square-1 step by step, with about fifteen algorithms: cube shape through the star, colours, corners, edges, parity and the middle layer.

    To practise without scrambling your own puzzle, there is the Square-1 simulator. Once you can solve it on your own, time yourself with the timer and compare with the world records. For other puzzles there are more solvers and the guide to types of cubes.

    Frequently asked questions

    How do I solve a Square-1 online?

    Type the scramble you used to mix up the puzzle, in WCA notation, or ask for a random scramble and apply it to your Square-1. When you press Solve you get the solution in the same notation, with a 3D Square-1 that plays it move by move.

    Can I paint the colours of my Square-1 or scan it with the camera?

    No. For the Square-1 the position can only be entered as a scramble, typed in or generated at random. If you do not know which scramble mixed up your puzzle, the tool cannot read it.

    What does (1,0) / (-1,3) mean in a Square-1 scramble?

    (1,0) turns the top layer 30° clockwise as seen from above. The slash (/) gives the right half a half turn. (-1,3) turns the top layer 30° the other way and the bottom layer 90° clockwise as seen from below.

    How many moves does the solution have?

    About 25 on average, counting each (x,y) and each slash as one move, with around 12 slashes, and hardly ever more than 33. It is not the shortest possible solution, which never goes over 31, but it is easy to follow.

    Why does it say "I can't read that scramble"?

    Because the scramble contains a symbol that is not part of the notation, such as a letter or a square bracket, or because it asks for a slash while a corner blocks the cut. It is usually a miscopied number: check the scramble bracket by bracket.

    Does the solution also fix parity and the middle layer?

    Yes. The tool solves the shape, the order of the pieces and parity together, and leaves the middle layer square at the end, with no separate algorithm needed.

    Keep learning